Stock: In Stock
Model: Kit-ceramico-K1
60 W ceramic hotend kit for replacing the heating and melt-zone assembly on Creality K1 and K1 Max printers fitted with the matching earlier-generation geometry and connectors. It includes the surround heater, thermistor, 0.4 mm nozzle, silicone sock, heatsink and mounting parts.
Check the revision..
11.60€
Ex Tax:9.59€
Stock: In Stock
Model: Hermit-crab-V2
The BIGTREETECH Hermit Crab V2.0 CAN is a manual quick-change platform designed to keep several toolheads prepared and swap them without dismantling every carriage component. It includes one electronic fixed plate and three removable tool plates for compatible hotends, extruders, probes or other too..
158.50€
Ex Tax:130.99€
Stock: In Stock
Model: Brass-V6-Heater-Block-PT100
Brass V6 heater block designed for temperature sensors with a 3 mm cylindrical encapsulation. Brass provides greater mechanical strength and higher thermal inertia, helping the hotend maintain a more stable temperature during printing.
Features
Material: brass.
Format: V6.
Nozzle thread: M6...
4.85€
Ex Tax:4.01€
Out of Stock
Stock: Out of Stock
Model: Kit-Bloque-Kobra3
Replacement assembly for the hotend fitted to the Anycubic Kobra 3 and Kobra 3 Combo. It is supplied assembled with a heater block, heater cartridge, thermistor, bimetal heatbreak, 0.4 mm Brass nozzle and silicone sock.
It is intended to connect to the original Kobra 3 printhead. It should not be..
12.70€
Ex Tax:10.50€
Out of Stock
Stock: Out of Stock
Model: Block-Rapido2F
Original replacement heater block for the Phaetus RAPIDO 2F hotend. It replaces a damaged block during repair or maintenance while preserving the melting-zone geometry designed for this specific model.
Features
Specific replacement part for the Phaetus RAPIDO 2F hotend.
Extended heating-zone ..
27.45€
Ex Tax:22.69€
Stock: In Stock
Model: CHC-b3950-24V
Trianglelab 24 V CHC ceramic heater core with an integrated NTC 100K B3950 thermistor. It replaces the separate block, heater cartridge and sensor with a compact assembly that heats in a ring around the melt zone. It is particularly useful for compatible V6 assemblies and conversions where low volum..
19.50€
Ex Tax:16.12€
Stock: In Stock
Model: CHC-PRO-b3950-24V
Trianglelab 24 V CHC Pro ceramic heater core with an integrated NTC 100K B3950 thermistor and a declared maximum power of 115 W. Its extended body creates a Volcano-type melt zone and surrounds the filament path with ring-shaped ceramic heating, an architecture intended for applications that require..
25.50€
Ex Tax:21.07€
Stock: In Stock
Model: V6-Heater-Block-PT100
V6-format heater block designed to accommodate temperature sensors with a nominal 3 mm cylindrical encapsulation, including NTC thermistors and RTD sensors such as the PT100. It also firmly secures the heater cartridge, providing stable installation and good thermal contact between the hotend compon..
0.90€
Ex Tax:0.74€
Stock: In Stock
Model: V6-Heater-Block
V6-format heater block designed to secure the heater cartridge and thermistor using independent clamping systems. This configuration provides stable installation of the components responsible for heating and monitoring the hotend temperature.
Features
Format: V6.
Nozzle thread: M6.
Thermisto..
0.60€
Ex Tax:0.50€
Out of Stock
Stock: Out of Stock
Model: BlockV6-PlatedCopper
V6 Plated Copper heater block designed for temperature sensors with a 3 mm cylindrical encapsulation. It is made from a special high-temperature copper alloy and features a nickel-based coating that protects the surface and reduces plastic adhesion.
Features
Material: high-temperature copper a..
9.75€
Ex Tax:8.06€
Stock: In Stock
Model: Heater-Block-Vol
Aluminum-alloy heater block for Volcano-format hotends. It is designed to accommodate temperature sensors with a 3 mm cylindrical encapsulation and use M6-threaded Volcano nozzles.
Features
Format: Volcano.
Material: aluminum alloy.
Nozzle thread: M6.
Housing for 3 mm encapsulated temperatu..
1.90€
Ex Tax:1.57€
Showing 1 to 11 of 11 (1 Pages)