Stock: In Stock
Model: Resistencia 12V 40W TN2F
This 12 V 40 W heater cartridge is designed to heat the heater block of FDM 3D printer hotends. Its power output provides fast heat-up times and stable temperature control, making it compatible with a wide range of hotends that use standard heater cartridges.
Its metal construction and high-tempe..
0.95€
Ex Tax:0.79€
Stock: In Stock
Model: Resistencia 12V 50W
12 V, 50 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. It is intended for 12 V machines whose electronics, wiring and power supply can safely control its approximate 4.17 A current draw.
Compared with a 12 V, 40 W heater, this cartridge provides more power but ..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Resistencia-ceramica-Rapido2F
Replacement ceramic heating element for the Phaetus RAPIDO 2F hotend. It operates at 24 V with a nominal power of 115 W and is intended to replace the original heater during repair or maintenance.
Main features
Rated voltage: 24 V.
Rated power: 115 W.
Ceramic heating element.
1 metre silico..
10.25€
Ex Tax:8.47€
Stock: In Stock
Model: Resistencia 24V 40W
24 V, 40 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. This configuration is widely used in 24 V V6-style hotends and is suitable as a replacement when dimensions, voltage, power, cable length and electrical connection all match.
The cartridge has a metal sheat..
0.95€
Ex Tax:0.79€
Stock: In Stock
Model: ResistenciaPlana-24V-48W
flat ceramic heater rated for 24 V and a nominal 48 W, designed as a compatible replacement for Bambu Lab X1 and X1 Carbon hotends. It can replace a damaged heater while retaining the electrical specification and architecture of the original hotend assembly.
This is a compatible replacement manuf..
5.80€
Ex Tax:4.79€
Stock: In Stock
Model: Resistencia 24V 50W
24 V, 50 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. Its power rating is suitable for extrusion systems designed or properly adapted to control a 50 W load.
It can be used as a replacement or for a custom hotend assembly, but it must not be treated as a direc..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Resistencia 24V 60W
24 V, 60 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. Its 6 × 20 mm body and 1 metre cable make it suitable as a replacement or for custom assemblies that are mechanically, electrically and thermally designed for this power level.
Compared with a common lower-power cartridg..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 70W
24 V, 70 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. This high-power variant is intended for systems that can both use and safely handle it: before replacing a 40 or 60 W heater, check the controller output, power supply, terminals, wiring, sensor, block and thermal configura..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 80W
24 V, 80 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. Its high power may shorten heat-up time and improve thermal recovery, but the hotend and entire electrical path must be verified as suitable before it can be used safely.
Technical specifications
..
3.50€
Ex Tax:2.89€
Stock: In Stock
Model: Resistencia-ceramica-ACE
Original Trianglelab 24 V, 105 W nominal ceramic heating element, designed as a replacement for the Dragon ACE hotend. Its flat format transfers heat directly to the heater block and allows replacement without completely disassembling the hotend.
The version currently supplied corresponds to Tria..
10.25€
Ex Tax:8.47€
Stock: In Stock
Model: CHC-b3950-24V
Trianglelab 24 V CHC ceramic heater core with an integrated NTC 100K B3950 thermistor. It replaces the separate block, heater cartridge and sensor with a compact assembly that heats in a ring around the melt zone. It is particularly useful for compatible V6 assemblies and conversions where low volum..
19.50€
Ex Tax:16.12€
Stock: In Stock
Model: CHC-PRO-b3950-24V
Trianglelab 24 V CHC Pro ceramic heater core with an integrated NTC 100K B3950 thermistor and a declared maximum power of 115 W. Its extended body creates a Volcano-type melt zone and surrounds the filament path with ring-shaped ceramic heating, an architecture intended for applications that require..
25.50€
Ex Tax:21.07€
Showing 1 to 12 of 12 (1 Pages)