Stock: In Stock
Model: 5015s-12V
5015-format centrifugal blower fan powered from 12 V and supplied with an approximately 1 metre cable. Its side outlet allows air to be directed through a duct, making it suitable for part cooling, compact air channels, electronics and other applications requiring localised airflow.
Specification..
4.00€
Ex Tax:3.31€
New
Stock: In Stock
Model: Dual-fan-cable
Y-splitter cable designed to connect two two-wire fans to a single output. It distributes the power received through the input connector to two parallel branches, simplifying the wiring of dual-fan cooling systems.
It is useful in 3D printers, CNC machines and electronics enclosures fitted with t..
0.49€
Ex Tax:0.41€
-14 %
Stock: In Stock
Model: 2510-12V
This 12 V 2510 brushless cooling fan provides efficient airflow in compact spaces. Measuring just 25 × 25 × 10 mm, it is ideal for cooling hotends, electronics, drivers, Raspberry Pi boards and other equipment where installation space is limited.
Features
Brushless DC cooling fan.
C..
3.00€ 2.59€
Ex Tax:2.14€
Stock: In Stock
Model: 3010-12v-1m
3010 12V axial fan with a 1 metre power cable. Its nominal 30 × 30 × 10 mm dimensions make it suitable for hotends, small heatsinks, electronics and other mechanisms with limited space.
The long cable simplifies connection where the controller is located away from the cooling point and allows the..
2.99€
Ex Tax:2.47€
Stock: In Stock
Model: V6-fan-support
Fan mount and air duct designed to install a 30 × 30 × 10 mm 3010 axial fan on a V6-style hotend heatsink. The part clips around the side of the heatsink fins and directs the fan's airflow through them.
It is manufactured from black injection-moulded plastic. Its clip-on installation allows the f..
0.75€
Ex Tax:0.62€
-47 %
Out of Stock
Stock: Out of Stock
Model: 4010-12v 1m
This 40 × 40 × 10 mm axial cooling fan operates at 12 V DC and features a 1 metre cable, making it ideal for installations where additional cable length is required between the fan and the controller or power source.
Features
40 × 40 × 10 mm axial cooling fan.
12 V DC operation.
..
4.25€ 2.25€
Ex Tax:1.86€
-47 %
Stock: In Stock
Model: 4010-24v 1m
4010 24V axial fan with a 1 metre power cable and a 2-pin XH2.54 connector. Its nominal 40 × 40 × 10 mm dimensions make it suitable for cooling hotends, heatsinks, electronics and small compartments.
The long cable simplifies installation in 3D printers and other machines where the controller boa..
4.25€ 2.25€
Ex Tax:1.86€
-69 %
Stock: In Stock
Model: 4020-24v
4020 24V axial fan with a PH connector and a 17 cm cable. Its nominal 40 × 40 × 20 mm dimensions provide a deeper housing than a 4010 fan, producing direct airflow for heatsinks, electronics and small compartments.
It is intended for applications where there is space for a 20 mm thick fan and con..
4.75€ 1.49€
Ex Tax:1.23€
-25 %
Stock: In Stock
Model: 4020-BallBearing-Fan-24V-1m
4020 24V axial fan with a ball bearing system and a 1 metre power cable. Its 40 × 40 × 20 mm format is suitable for cooling heatsinks, electronics and compact equipment that can accommodate a 20 mm thick housing.
The ball bearing system is intended for frequent or extended operation, particularly..
4.80€ 3.60€
Ex Tax:2.98€
-71 %
Stock: In Stock
Model: 6010-24V
6010 24V axial fan with an 11-blade impeller, a 2-pin XH2.54 connector and an approximately 20 cm cable. Its nominal 60 × 60 × 10 mm dimensions provide broad airflow while maintaining a slim profile.
It is suitable for cooling electronics, controller boards, power supplies and small enclosures us..
5.45€ 1.59€
Ex Tax:1.31€
-68 %
Stock: In Stock
Model: 6015-24v
6015 24V axial fan with a 7-blade impeller, a 2-pin XH2.54 connector and an approximately 20 cm cable. Its 60 × 60 × 15 mm dimensions provide an intermediate format between 6010 and 6020 fans.
It can be used to cool electronic boards, power supplies, controllers and compartments requiring air cir..
5.99€ 1.89€
Ex Tax:1.56€
-28 %
Stock: In Stock
Model: 6015-BallBearing-Fan-24V
6015 24V axial fan with a ball bearing system and a 15 cm cable. Its nominal 60 × 60 × 15 mm dimensions make it suitable for cooling electronics, power supplies and enclosures used in 3D printers or CNC machines.
The ball bearing system is particularly suitable for equipment subject to extended o..
4.50€ 3.25€
Ex Tax:2.69€