Recommended
-43 %
Stock: In Stock
Model: PLA HD 1.75mm
WINKLE PLA HD is a rigid 1.75 mm filament for FDM/FFF 3D printing, intended for detailed parts and a clean finish without requiring an enclosed chamber. It is manufactured in Spain and is suitable for models, figures, prototypes, organisers and indoor parts with moderate mechanical requirements.
..
9.00€ 5.15€
Ex Tax:4.26€
Recommended
-29 %
Stock: In Stock
Model: HTA3D-Extrusor
Extrusor directo HTA3D V2 desarrollado para la 3DSteel. Reúne doble arrastre para filamento de 1,75 mm, hotend V6 all-metal, 3DTouch, sensor mecánico de presencia de filamento y refrigeración de capa en un conjunto que se entrega montado. Aunque es un diseño veterano, sigue siendo una mejora complet..
99.00€ 69.99€
Ex Tax:57.84€
FLASH
-13 %
Stock: In Stock
Model: HB-fysetc-220x220-24v
FYSETC 220 × 220 mm, 24 V magnetic heated bed designed to work with a removable flexible spring-steel build plate. The magnets are embedded in the rear of the heated bed, removing the need to install a separate adhesive magnetic base.
It is a practical solution for building or upgrading a 3D prin..
45.99€ 39.99€
Ex Tax:33.05€
-17 %
Stock: In Stock
Model: 6010-5V
GDSTIME 6010 5V axial fan with an 11-blade impeller, a 2-pin XH2.54 connector and an approximately 20 to 25 cm cable. Its 60 × 60 × 10 mm format provides direct cooling while maintaining a slim profile.
It is suitable for electronic boards, single-board computers, small enclosures and other 5V de..
5.45€ 4.50€
Ex Tax:3.72€
-12 %
Stock: In Stock
Model: 82A Filaflex
Recreus Filaflex 82A Original is a 1.75 mm flexible TPU filament developed by Recreus, a Spanish brand specialising in flexible materials for 3D printing. Its Shore 82A hardness provides a combination of high elasticity, strength and shape recovery, with elongation at break of up to 650% according t..
20.45€ 17.99€
Ex Tax:14.87€
-10 %
Stock: In Stock
Model: PLA-Go&Print 1.75mm-SAKATA3D
Sakata 3D RE-GO&PRINT is a PLA filament manufactured in Spain from GO&PRINT material recovered from Sakata 3D’s own production process. It makes use of material that would otherwise become waste while retaining printing characteristics similar to the GO&PRINT family.
The rec..
14.44€ 12.95€
Ex Tax:10.70€
-12 %
Stock: In Stock
Model: PLA-Go&Print-1.75mm-SAKATA3D
Sakata 3D PLA GO&PRINT is a filament manufactured in Spain and designed to provide easy, stable printing with a good surface finish on both conventional and high-speed 3D printers.
Its natural-origin PLA formulation offers good rigidity, low warping and straightforward processing. A..
16.99€ 14.99€
Ex Tax:12.39€
-10 %
Stock: In Stock
Model: PLA-HS-PRO-1.75mm-SAKATA3D
Sakata 3D PLA High Speed PRO is a 1.75 mm PLA filament made in Spain and developed for both conventional and high-speed printing profiles. Its technical data sheet covers 50–100 mm/s in a classic profile and 100–500 mm/s in fast machines, with a declared maximum volumetric flow of 24 mm³/s under the..
20.82€ 18.65€
Ex Tax:15.41€
FLASH
-38 %
Stock: In Stock
Model: PLA-HS-PRO-1.75mm-SAKATA3D
Sakata 3D PLA High Speed PRO Transition is a high-speed PLA filament made in Spain from colour changes generated during production. Every spool is different: the colour, combination and position of the transitions are random and cannot be selected or guaranteed.
Important colour information: ..
15.99€ 9.99€
Ex Tax:8.26€
-32 %
Stock: In Stock
Model: PLA-3D870-1.75mm-SAKATA3D
Sakata 3D PLA HR-870 is a Spanish-made engineering filament based on Ingeo 3D870, formulated to improve impact resistance and thermal performance over conventional PLA. It retains PLA's accessible printing behaviour and supports both conventional and high-flow printer profiles.
What HR-..
29.95€ 20.40€
Ex Tax:16.86€
-49 %
Stock: In Stock
Model: RE-FLEX-85A-SAKATA3D
Sakata 3D RE-FLEX-85A is an 85 Shore A flexible filament manufactured in Spain for FDM/FFF 3D printing. Sakata 3D developed it as an alternative to TPU/TPE materials, combining flexibility, impact absorption and comparatively accessible printing.
This version is supplied in green, 1.75 mm diamete..
14.75€ 7.50€
Ex Tax:6.20€
-52 %
Stock: In Stock
Model: PETG-WINKLE
WINKLE 1.75 mm PETG filament, made in Spain, provides a practical balance of printability, toughness and dimensional stability. It is a versatile choice for housings, brackets, guards, prototypes and functional parts that need better impact resistance and layer bonding than conventional PLA.
..
12.50€ 5.99€
Ex Tax:4.95€