Support to adjust horizontally the height of your 3D printer or other machines. The base is a non-slip rubber.Specifications:Base material: reinforced nylon.Screw material: steel.Diameter of the base: 50mmScrew: M8Screw length: 50 mm1 unit ..
Version: 2.0BIGTREETECH ADXL345 V2.0 is a module for 3D printer resonance compensation. It can communicate through USB, greatly simplifying wiring.Main features:The board has a reserved BOOT button for easey firmware updates.Reserved solder points enable users to customize wiring easily.The USB port..
Composition:
-Printed parts (ABS)
-MK8
Drive Gear -Bearings:
1 x 608zz
1 x MR105ZZ -Hardware:
4 x M3 Washers
4 x M3 Nuts
1 x M3 25mm
2 x M3 30mm
1 x M3 6mm ..
Advantages:
It can print any material: From PLA, due to it thermical
barrier made of stainless steel and its dissipation with
forced ventilation, to Nylon, Polycarbonate, Polyoxymethylene y
others thermoplastics which need higher temperatures. And also, as
it is natural..
The main advantage of this Hotend with respect to the conventional V6 is the change of the heating block and thermistor.It is an encapsulated thermistor, which makes it more resistant to deterioration and breakage.Also, as an insulator, use a silicone sock specially adapted for the heating block. Th..
All features similar to MK2, you can also operate this board with 12 Volt or 24 Volt Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend..
All features similar to MK2 12v / 24v Volt.Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend insulating the bottom side with Thermal Insula..
Hotbed size 220x280 With countersunk holes for screw head, compatible with most Y-axis carriages, including 220x220 or 214x214 bed carriages, because of it has exactly the same spacing between holes (209mm).All features similar to MK2 12 VoltHeatbed with 3mm aluminum core. You can print directly on ..
All features similar to MK2 24V.Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory.The metallic side is the top print side and the black side is the bottom side. We recommend insulating the bottom side with Thermal Insulator.Operate at 2..
All features similar to MK2 24 VoltHeatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend insulating the bottom side with Thermal InsulatorOperate at..