-34 %
Stock: In Stock
Model: Prusai3-Rework
KIT PRUSA I3 REWORK PRINTED PARTS
Printed parts:
-Extruder (3,00mm /1,75mm):Extruder BodyExtruder IlderGears (Improvement: These
gears are helical and are specially designed for Prusa i3
Rework)Budas Adapter (Extra: With this adapter you can use
any Hotend Budas-S..
32.00€ 21.00€
Ex Tax:17.36€
-46 %
Out of Stock
Stock: Out of Stock
Model: RAMPS1.6
RepRap Pololu Arduino Mega Shield or RAMPS. It is designed to connect all the electronic components required for a RepRap. The modular design includes connectors for the stepper mortos and controll electronics on a shield Arduino MEGA for easy maintenance. Ramps 1.6 is optimized and l..
20.00€ 10.75€
Ex Tax:8.88€
Recommended
-45 %
Out of Stock
Stock: Out of Stock
Model: RAMPS1.6+
This version of the popular Ramps 3D printer electronics is a revision that integrates SPI compatibility, eliminating the need for extra wiring for the SPI pins.Main features:Compatible with SPI and SPEP / DIR, configurable through the jumpers integrated in the board.4-layer motherboard, improving o..
20.00€ 10.99€
Ex Tax:9.08€
-60 %
Stock: In Stock
Model: Teflón-4-1.9-red
Teflon tube with internal diameter 1.9mm, for 1.75mm filament.The inner walls of the tube are very smooth, which guarantees a high control over the flow.Due to its internal diameter of 1.9mm it is used for direct extruders, not recommended for use in bowden extruders.Features: It is made of pol..
0.60€ 0.24€
Ex Tax:0.20€
-12 %
Stock: In Stock
Model: PETG-Recreus
Recreus PETG is a rigid filament that has mechanical properties comparable to ABS, with good temperature resistance, durability and strength, and is as easy to print as PLA. Its properties of adhesion between layers, its non-emission of odours and its high resistance to chemical agents (solvent..
24.90€ 22.00€
Ex Tax:18.18€
Only a few units in stock
-21 %
Stock: In Stock
Model: PP3D-Recreus
The new and disruptive polypropylene (PP) filament of Recreus PP-3D has been developed jointly with the multinational Repsol. This synergy has made it possible to launch a high quality polypropylene thanks to their high degree of experience in the manufacture of polyolefins. The filament must b..
49.90€ 39.50€
Ex Tax:32.64€
Only a few units in stock
-11 %
Stock: In Stock
Model: SKR 3
SKR 3 by Bigtreetech is the successor to SKR 2. This versatile 32-bit motherboard with powerful 480MHz ARM Cortex-M7 is suitable for most 3D printers and offers more interfaces and upgrade options than most embedded motherboards.Main features: ARM Cortex-M7 series MCU: Deliver..
89.99€ 79.99€
Ex Tax:66.11€
Only a few units in stock
Clearance
-41 %
Stock: In Stock
Model: SKR mini E3 V2.0
The SKR mini E3 SKR mini E3 V2.0, evolution of the SKR mini E3 V1.2, is a board specially designed for the Ender3 3D printer, which can perfectly replace the original board.Features:Size: 100.75x70.25mmMicroprocessor: ARM Cortex-M3 STM32F103RCT6 chip with 32-bit CPU 72MHZInput voltage: 12/24VLogic v..
64.49€ 37.99€
Ex Tax:31.40€
Clearance
-44 %
Stock: In Stock
Model: SMARTFIL ABS 1.75mm
Acrylonitrile Butadiene Styrene. It is one of the most used thermoplastics in 3D printing. Its main characteristics: very tough, hard and rigid material, with chemical resistance to abrasion. It is soluble in acetone. It is not biodegradable, and suffers from exposure to UV rays. It requires a hot b..
18.00€ 9.99€
Ex Tax:8.26€
Only a few units in stock
-18 %
Stock: In Stock
Model: SMARTFIL ASA 1.75mm
ASA is a filament for 3d printing with exceptional weather resistance.Unlike many plastic materials, the ASA maintains its color and impact resistance, even after long-term outdoor use. It is mechanically robust, perfect for applications with need of resistance. Resistant to ultraviolet rays (U.V.),..
26.00€ 21.25€
Ex Tax:17.56€
-35 %
Stock: In Stock
Model: SMARTFIL FLEX 1.75mm
Thermoplastic elastomerA material that has the ability to be stretched to moderate elongations and, after removal of the stress, return to its original shape. It has the potential to be recyclable as it can be molded and reused as plastic.FLEXIt is a specially additivated filament that allows the pr..
18.00€ 11.75€
Ex Tax:9.71€
-15 %
Out of Stock
Stock: Out of Stock
Model: SMARTFIL MEDICAL 1.75mm
High quality material specially designed for medical applications. This filament is Class USP VI or ISO 10993-1 certified, which makes this filament biocompatible with the human body.What can you do with this filament?Printing parts suitable for the healthcare industry. This filament has USP Class V..
35.00€ 29.70€
Ex Tax:24.55€