Only a few units in stock
-9 %
Stock: In Stock
Model: PLA-SILK-Tricolor-1.75mm
At Winkle, they have created the 3D filament with the greatest visual impact on the market.
PLA Silk Tricolor is a filament that delivers spectacular results in terms of quality and appearance. It is perfect for decorative applications, as it combines three tones along the spool, achiev..
22.50€ 20.39€
Ex Tax:16.85€
-20 %
Stock: In Stock
Model: Lámina Fysetc 220x220
The FYSETC 220 × 220mm flexible sheet combines two printing surfaces on a single spring-steel plate: a smooth gold face and a black textured PEI face. This lets you choose the bottom finish and adapt the surface to the filament without replacing the whole bed system.
It attaches to a compatible m..
32.00€ 25.75€
Ex Tax:21.28€
Only a few units in stock
Clearance
-21 %
Stock: In Stock
Model: R4-Fysetc
The FYSETC R4 is a compact 24 V controller board designed for four-motor Klipper 3D printers, with a particular focus on the Voron V0 family. It combines an RP2040 microcontroller, four UART-controlled TMC2209 drivers, bed and hotend outputs, three voltage-selectable fan outputs, three temperature i..
44.50€ 34.99€
Ex Tax:28.92€
Only a few units in stock
-16 %
Stock: In Stock
Model: 2510-24V
The GDSTIME 2510 24 V is a compact 25 × 25 × 10 mm brushless axial fan for cooling hotends, small electronics enclosures, stepper drivers and other assemblies where installation space is limited. It has two wires, an approximately 15 cm cable and a white two-pin connector.
The photographed unit i..
3.20€ 2.70€
Ex Tax:2.23€
-29 %
Stock: In Stock
Model: 3010-24v-1m
GDSTIME 3010 24V axial fan with a 1 metre power cable. Its compact 30 × 30 × 10 mm format is suitable for cooling hotends, small heatsinks, electronics and other components where space is limited.
The long cable simplifies installation in 3D printers and machines where the controller board is loc..
3.50€ 2.50€
Ex Tax:2.07€
-32 %
Stock: In Stock
Model: 4020-12V
Designed for active cooling in 3D printers, electronic equipment and automation systems, this GDSTIME 40 × 40 × 20 mm axial fan operates from a 12 V DC supply and provides a balanced combination of airflow, low noise and long service life. It is suitable for cooling control boards, heatsinks, enclos..
4.75€ 3.25€
Ex Tax:2.69€
FLASH
-28 %
Stock: In Stock
Model: 4020Blower-BallBearing-24V-1m
GDSTIME 4020 24V centrifugal blower fan with a ball bearing system and a 1 metre cable. It retains a nominal width of 40 mm while using a 20 mm thick housing, allowing a larger impeller than a 4010 blower.
It is suitable for directed cooling where a compact fan designed for frequent operation is ..
6.90€ 4.99€
Ex Tax:4.12€
-28 %
Stock: In Stock
Model: 6020-RodBolas-24V
GDSTIME 6020 24V axial fan with dual ball bearings, a 2-pin XH2.54 connector and an approximately 25 cm cable. Its nominal 60 × 60 × 20 mm dimensions provide direct airflow for cooling electronics, power supplies, heatsinks and machine enclosures.
The dual ball bearing system is particularly suit..
8.50€ 6.10€
Ex Tax:5.04€
FLASH
-11 %
Stock: In Stock
Model: PLA+ GST3D
GST3D PLA+ 1.75 mm filament is a versatile choice for general-purpose 3D printing: visual prototypes, models, decorations, organisers, housings and everyday parts that will not operate at high temperatures. It is supplied on a 1 kg spool in a broad selection of colours.
Compared with the special fi..
12.75€ 11.35€
Ex Tax:9.38€
Only a few units in stock
-60 %
Stock: In Stock
Model: GT2-36T-ID5
GT2 36-tooth timing pulley for 6 mm belts and 5 mm shafts, made of aluminium and fitted with a hub for grub-screw fastening.
It can be used as a large drive pulley or as a driven pulley in a belt reduction. Its function and required configuration depend on its position within the transmission.
..
5.00€ 1.99€
Ex Tax:1.64€
Only a few units in stock
-9 %
Stock: In Stock
Model: Spindle-775-288W
The HANPOSE 775-288W is a brushed DC, double-ball-bearing, double-shaft motor for building compact spindles in small CNC machines, engravers and bench tools. It is the fastest member of this family, with declared no-load reference speeds of 6,000rpm at 12V and 12,000rpm at 24V.
Its 5 × 16mm round f..
14.25€ 12.99€
Ex Tax:10.74€
-73 %
Stock: In Stock
Model: P3Steel_HTA3D_HardwareSet
Hardware kit prepared for assembling and maintaining an HTA3D P3Steel 3D printer with a single-extruder configuration. It brings together the screws, nuts, washers and bed springs used in this version of the machine.
Suitable for building an HTA3D P3Steel, replacing worn hardware or keeping a mat..
20.00€ 5.35€
Ex Tax:4.42€