-20 %
Stock: In Stock
Model: Protector-fuente-3Dsteel
Printed-part set designed to protect the power-supply connections used on the original HTA3D 3DSteel. It consists of a base and a ventilated cover that provide access during installation while reducing accidental exposure to the terminals.
The cover is prepared for a switched IEC mains inlet, all..
7.50€ 6.00€
Ex Tax:4.96€
-40 %
Stock: In Stock
Model: Prusa i3 Rework-Tornillería
Fastener kit for assembling or repairing a Prusa i3 Rework with the classic mechanical configuration based on M10 threaded rods and M5-thread Z-axis motion. It brings together screws, nuts, washers, bed springs and the special hardware used by the extruder and Z axis.
It is a practical way to obtai..
20.00€ 12.00€
Ex Tax:9.92€
-34 %
Stock: In Stock
Model: Prusai3-Rework
This kit includes the printed parts required to assemble, repair or upgrade a Prusa i3 Rework 3D printer. All parts are designed to maintain compatibility with this printer model while incorporating several improvements over the original design to simplify assembly and enhance overall performance.
..
32.00€ 21.00€
Ex Tax:17.36€
Only a few units in stock
-13 %
Stock: In Stock
Model: PTC-12V-70W
The PTC Heater (Positive Temperature Coefficient) is the ideal solution for those seeking an efficient, safe, and long-lasting heating system. Ideal for heated 3D printers.Designed with advanced technology and high-quality materials, this device stands out for its exceptional performance and ease of..
14.99€ 12.99€
Ex Tax:10.74€
Only a few units in stock
-18 %
Stock: In Stock
Model: 60A-Filaflex-PRO
Recreus Filaflex 60A PRO is a Spanish-made 1.75 mm TPU filament for printing exceptionally soft, elastic parts with reliable shape recovery. It is the most flexible grade in the Filaflex range and is intended for experienced users with direct drive and an especially well-constrained filament path.
..
49.90€ 40.99€
Ex Tax:33.88€
Only a few units in stock
-13 %
Stock: In Stock
Model: 70A-Filaflex-Ultra-Soft
Recreus Filaflex 70A Ultra-Soft is a 1.75 mm TPU filament made in Spain for printing extremely soft, elastic parts with reliable shape recovery. Its 70 Shore A hardness gives it a silicone-like feel, although the material is a thermoplastic polyurethane rather than silicone.
Recreus specifies elong..
45.86€ 39.99€
Ex Tax:33.05€
Only a few units in stock
-9 %
Stock: In Stock
Model: Filaflex-Purifier
Recreus Filaflex Purifier is a flexible polyether TPU filament rated at 82 Shore A, combining Filaflex elasticity with Pure.tech mineral technology. Recreus states that the formulation adsorbs CO₂, nitrogen oxides (NOx) and volatile organic compounds (VOCs) that contact the surface, transforming the..
44.90€ 40.99€
Ex Tax:33.88€
Only a few units in stock
-12 %
Stock: In Stock
Model: Filaflex-SEBS
Recreus Filaflex SEBS 90A is a Spanish-made 1.75 mm flexible filament based on a SEBS TPE (styrene-ethylene-butylene-styrene). It combines a soft feel with good elastic recovery and a nominal Shore 90A hardness, making it easier to feed than ultra-soft Filaflex grades while still producing flexible ..
33.90€ 29.99€
Ex Tax:24.79€
Only a few units in stock
-5 %
Stock: In Stock
Model: Recreus-PETG-G CF
Recreus PET-G CF is a 1.75 mm technical filament based on PET-G and reinforced with 10% carbon fibre. It combines the dimensional ease of PET-G with high stiffness, reduced warping and a matte black finish suited to functional parts, tooling, brackets, housings and technical prototypes.
Developed..
47.50€ 44.99€
Ex Tax:37.18€
-12 %
Stock: In Stock
Model: PETG-Recreus
Recreus PET-G HF 1.75 mm is a rigid, high-flow filament made in Spain for functional parts, prototypes and FDM/FFF production. It combines the characteristic printability of PETG with good layer adhesion, impact resistance and a low tendency to warp.
Its HF formulation is designed to support high..
24.90€ 22.00€
Ex Tax:18.18€
Only a few units in stock
-7 %
Stock: In Stock
Model: Recreus-PLA-LW
Recreus PLA-LW black 1.75 mm — lightweight foaming PLA — 750 g
Recreus PLA-LW is a PLA filament with active foaming technology, developed and manufactured in Spain for printing large-volume parts at a lower density. Once the material is heated above its activation point, it expands inside the ext..
39.90€ 36.99€
Ex Tax:30.57€
Only a few units in stock
-21 %
Stock: In Stock
Model: PP3D-Recreus
Recreus PP·3D Natural is a 1.75 mm polypropylene filament for functional parts requiring low density, fatigue resistance, toughness and low friction. Its flexible, cyclically durable behaviour is particularly useful for living hinges, closures, containers and mechanical components.The spool contains..
49.90€ 39.50€
Ex Tax:32.64€