Search

Features:17HS3401: Compact Size, ideal for applications where you need lightweight, as mobile extruders, or other cases that works with low loads as CNC lasers, plotters and others. Each motor includes 1 meter of wire with dupont connector at its end. The shaft motor is D type, which eases..

Features:17HS4401: Compact and powerful, ideal for 3D printers in medium size, and also for small CNC machines and robotics in general. This one is the most used size. Each motor includes 1 meter of wire with dupont connector at its end. The shaft motor is D type, which eases the use of pu..

Features:17HS4401s-09 - 42HS40-0.9 - 42-40 0.9: Compact and powerful, ideal for 3D printers in medium size, and also for small CNC machines and robotics in general. This one is the most used size.Step Angle: 0.9º. Half conventinal stepper motor, which give double precision.Low noise, low vibration, ..

Features: 17HS6401: Much power keeping the Nema 17 format, recommended for big CNC machines or giant 3D printers. Each motor includes 1 meter of wire with dupont connector at its end. The shaft motor is D type, which eases the use of pulleys or couplers.  Nominal electrical ..

Features:17HS6401s-09 - 42HS60-0.9 - 42-60 0.9: Compact and powerful, ideal for 3D printers in medium size, and also for small CNC machines and robotics in general. This one is the most used size.Step Angle: 0.9º. Half conventinal stepper motor, which give double precision.Low noise, low vibration, ..

Features: 17HS8401: A little more power,  suitable for bigger 3D printers or medium CNC machines. Each motor includes 1 meter of wire with dupont connector at its end. The shaft motor is D type, which eases the use of pulleys or couplers.  Nominal electrical specificati..

Features:17HS8401s-09 - 42HS48-0.9 - 42-48 0.9: Compact and powerful, ideal for 3D printers in medium size, and also for small CNC machines and robotics in general. This one is the most used size.Step Angle: 0.9º. Half conventinal stepper motor, which give double precision.Low noise, low vibration, ..

Features:Each motor includes 30 cm of wire.The shaft motor is D type, which eases the use of pulleys or couplers. ModeloStep Angle (grados)Motor Length (mm)Rated Current (A)Phase Resistence (ohm)Phase Inductance (mH)Holding Torque (N·cm min)Detent Torque (N·cm max)Rotor Inercia (g·cm2)Number of..

Spring  7.5x20mm, for M4 or M3.External diameter: 7.5mmInner diameter: 5mmLength: 20mmMaterial: Nickel-plated steel 1 unit..

These nozzles perform the function of extruding melted plastic in the 3D printing process.The Teflon coating prevents filament from adhering to the tip.Features:Output tolerance: ±0.005 - 0.01mm.Roughness: <= Ra 0.2 / 3.2.High quality material.The inner wall is smooth and without blurrs.Sandblast..

These nozzles perform the function of extruding melted plastic in the 3D printing process.The Teflon coating prevents filament from adhering to the tip.Features:Output tolerance: ±0.005 - 0.01mm.Roughness: <= Ra 0.2 / 3.2.High quality material.The inner wall is smooth and without blurrs.Sandblast..

Screws:M3x6: 4 unitsM3x8: 25 unitsM3x12: 80 unitsM3x14: 4 unitsM3x16: 1pcM3x20: 5 unitsM3x25: 4 units (countersunk and fully threaded)M3x25: 6 unitsM3x30: 4 unitsM3x35: 6 unitsM3x40: 1 unit - with springs and washerM4x6: 4 unitsM4x8: 2 unitsM4x25: 7 unitsM5x10: 4 unitsM4 setscrews: 4 unitsNuts:M3: 1..