Winkle's PLA-WOOD filament (1.75mm) is a filament made in Spain for 3D printers with FFF/FDM technology. PLA is a biodegradable plastic that is obtained from natural resources from the starch extracted from corn, beets and wheat.PLA-WOOD is a PLA-based filament with a load of 40% wood fibers, made u..
Filament with luminescent properties, it is able to absorb light and emit it when it is in the dark.
Diameter:
1,75 mm
Packaging:Coil vacuum packed with desiccant..
PLA (polylactic acid) is a biodegradable polymer derived from renewable resources. It has gained much popularity in 3D printing. Extrusion temperature: 195 °C - 205 °C Recommended temperature heated bed: 40ªC (optional)Features:Sakata 3D Filaments PLA-M filament has been specifically formu..
These nozzles are designed to achieve the best performance at high temperatures.Made from a special high-temperature copper alloy with a softening point well above 500 ° C, and with much higher thermal conductivity, these silver-plated copper nozzles are perfect for high-temperature applications, wh..
These nozzles are designed to achieve the best performance at high temperatures.Made from a special high-temperature copper alloy with a softening point well above 500 ° C, and with much higher thermal conductivity, these silver-plated copper nozzles are perfect for high-temperature applications, wh..
The PP-GF filament has been developed in collaboration with the multinational Repsol. This union has improved the strength and durability characteristics of this material, making it an ideal choice for applications that require a high level of mechanical strength. Polypropylene fil..
This POM nut is used for the movement of the Z axis in 3D printers. The POM is a material with a low friction that is machined very precisely, which makes the movement with these nuts very precise and without play.Steps per mm: 800 (using 1/32 drivers) Nominal dimensions: Di..
This POM nut is used for the movement of the Z axis in 3D printers. The POM is a material with a low friction that is machined very precisely, which makes the movement with these nuts very precise and without play.Nominal dimensions: Diameter: 8mm Thread pitch: 2mm 1 Piece&n..
With the Portable Input Shaper, the resonance of the axes can be measured by different axes to be later compensated by the printers.Features:Based on the popular RP2040 chip.Portable, you can use it on multiple 3D printers with Klipper firmware with the same configuration file.Small in size and easy..
Printed part for the electronics that the 3DSteel printer carries. Protects and assembles in the structure in an easy and safe way.All the electronic components remain inside and have space to lodge in an orderly manner the excess cable in case of needed.Material: PLA 3D850.You can optionally add th..
Printed part for the electronics that the 3DSteel V2 printer carries. Protects and assembles in the structure in an easy and safe way.All the electronic components remain inside and have space to lodge in an orderly manner the excess cable in case of needed.Material: PLA 3D850.You can optionally add..
Printed protective part for the 33A power supply used by the 3DSteel printer.You can make the connections of the power supply and then place the printed pieces. Thanks to its design it is very easy to assemble and manipulate afterwards.It is designed to use the power outlet with switch, so that it w..