Menu
Your Cart

Flexible steel sheet Ultem (PEI) coated on both sides - great hold - for magnetic bed 220x220mm

Flexible steel sheet Ultem (PEI) coated on both sides - great hold - for magnetic bed 220x220mm
Flexible steel sheet Ultem (PEI) coated on both sides - great hold - for magnetic bed 220x220mm
Flexible steel sheet Ultem (PEI) coated on both sides - great hold - for magnetic bed 220x220mm
Flexible steel sheet Ultem (PEI) coated on both sides - great hold - for magnetic bed 220x220mm
Flexible steel sheet Ultem (PEI) coated on both sides - great hold - for magnetic bed 220x220mm
28.75€
Tax 23.76€
  • Stock: In Stock
  • Model: Energetic-base-22x22

Model:

220x220mm

220x220mm

241x254mm

241x254mm

250x250mm

250x250mm

300x300mm

300x300mm

350x350mm

350x350mm

Printing base for 3D printers with great fixation. It is a sheet of spring steel with Ultem (PEI) coating applied.

It has excellent quality, which guarantees exceptional flatness and high resistance to oxidation.


Advantages:

  • Never warp or rust.
  • Easy to get the first layer well adhered even for a new user.
  • Flexible, easy placement and adheres very well to magnets.
  • It adapts to a wide variety of filaments, especially for PLA.
  • To detach the pieces once they have cooled, you simply have to bend the sheet a little and the pieces separate.
  • Great temperature performance, once printing is finished, you don't have to wait long for it to cool down.
  • It has one side with a "rough" finish and another matte. Both can be used.


Material:

  • Spring steel sheet, with Ultem1000 (PEI) coating.
  • Amber colour.
  • Made in Europe.
  • The foil is flat, flexible, rust-proof and adheres very well to magnets.
  • thickness of 0.5mm - 0.4mm approx.


Important information:

The manufacturer recommends printing at the following temperatures:

  • PLA - 60ºC
  • HTPLA - 60ºC
  • PETG - 70-80ºC
  • PCTG - 70-80ºC
  • ABS - 100ºC


Product Usage Guidelines

Care must be taken with the first layer, otherwise the material can stick too much to the surface and be damaged. Lacquer can be used before printing as a protective layer.

To separate the pieces we must ensure that the temperature of the sheet is room temperature (below 30ºC) before removing the pieces. If you remove it when it is hot, you are more likely to damage the surface.

100% Customers recommend this product

  • 5 Awesome
    100%
  • 4 Great
    0%
  • 3 Average
    0%
  • 2 Bad
    0%
  • 1 Poor
    0%
Please login or register to review

Reviews Over Flexible steel sheet Ultem (PEI) coated on both sides - great hold - for magnetic bed 220x220mm

  • (5)

Total Reviews (1)
click here write review to add review for this product.



Check out this bundle
This magnetic bed includes the magnets to be attached to a metal sheet coated with PEI on both sides. Simple and reliable operation...