Search - 1.75mm

It is an unreinforced copolyamide (Nylon) with high transparency, developed specifically for 3D printing.It offers excellent dimensional stability, stiffness, flexibility and shock resistance, and a very good balance between mechanical performance, shrinkage and adhesion to the bed. Unlike other Nyl..

PA-CF15 from Sakata3D Filaments is a copolyamide filament reforged with 15% special carbon fibers (CF) and heat stabilized, specially formulated for 3D printing applications. Its main characteristics are greater rigidity, excellent mechanical properties and resistance to abrasion, while maintaining ..

Sakata 3D OBC filament allows the creation of lightweight (up to 25%) and durable parts.Its semi-crystalline structure gives it excellent properties in the Z-axis compared to other materials, retaining more than 70% of the mechanical properties obtained in the XY axes.Its high chemical resistance an..

Orbiter V2.0 Extruder (1.75mm)The Orbiter V2.0 extruder gears are different from the V1.5 gears.Characteristics:Shorter drive gears: 11mm vs. 15mm.Strand gears hardenedWeight reduced to 135 grams approx.Smaller and more compact dimensions (11.6% shorter).The new motor design offers a ~40% increase i..

P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the P3STEEL redesigned by HTA3D.Due to its performance this is the model we use for our printings.Features:Printing volume: 200x200x210 (XYZ).Maximum printing speed recommended: 160x160x3 mm/s.Compatible with all 1...

Carbon fiber reinforced PET-G filament. This material has excellent mechanical properties to guarantee high impact-resistant parts without relinquishing the ease of PET-G printing. Excellent mechanical properties Impact- and wear-resistant Chemical resistance High thermal resista..

Filament manufactured in Spain for 3D printers with FFF/FDM technology. PETG is polyethylene terephthalate, with a modifier (Glycol-modified), which makes a change in the chemical structure that makes it more transparent, less fragile and easy to print.This PETG, improves on ABS in being resistant a..

PETG HD RE filament (1.75mm) is a recycled filament manufactured in Spain for 3D printers with FFF/FDM technology. PETG RE is made from the leftover material from the production of other filaments. Like our PETG, the recycled filament is subjected to quality verification processes that guarante..

Filament based on PLA Ingeo 3D870. New Ingeo PLA Formulation for 3D Filament Offers Heat and Impact Resistance Rivaling ABS and Processes and Prints with the Ease of PLAPess Release linkPRINTING PARAMETERS: - Extruder temperature: 200ºC - 230ºC - Bed temperature: Does not need (if app..

PLA HD CORK filament  is a filament manufactured in Spain for 3D printers with FFF/FDM technology. PLA is a biodegradable plastic obtained from natural resources from starch extracted from corn, beet and wheat. Besides this filament contains a load to 50% of natural cork along with the mixture ..

Pla Ingeo 3D700 is specially manufactured to offer low thermal shrinkage, around 0.25%, about 4 to 5 times lower than conventional PLA, this implies the following advantages:Better results in large format 3D printers.Superior dimensional accuracy.Print finish with fewer artifacts produced by materia..

PLA (polylactic acid) is a biodegradable polymer derived from renewable resources. It has gained much popularity in 3D printing. Raw Material: IngeoTM NatureWorks PLA 3D850* Extrusion temperature of about 180 °C - 210 °C Recommended temperature hot bed 0 - 60ªC (*: NatureWorks an..