- Stock: 1
- Model: PETG-RE-WINKLE
Colour Range
PETG
KRYSTAL
PETG RE
PETG Carbon Fiber
PETG Prototype
rPETG EN13501-1 Flame Retardant
WINKLE recycled PETG RE in 1.75 mm is made in Spain from recovered PETG filament production surplus, not used prints or post-consumer waste. It retains the functional character of PETG and is particularly suited to prototypes, jigs, housings and parts where performance matters more than repeating an exact colour.
Format and material origin
- Material: PETG recovered from filament manufacturing surplus.
- Declared content: 100% recycled.
- Diameter: 1.75 mm.
- Weight: 1 kg.
- Colour: random or variable.
- Manufacture: Spain.
Documented nominal properties
| Property | Value | Method |
|---|---|---|
| Density | 1.27 g/cm³ | ISO 1183 |
| Tensile strength | 50.4 MPa | ISO 527 |
| Tensile modulus | 2020 MPa | ISO 527 |
| Flexural strength | 69 MPa | ISO 178 |
| Charpy impact at 23°C | 8.1 kJ/m² | ISO 179 |
| Heat deflection temperature | 70°C | ASTM D648 |
These are nominal values for the tested material, not guarantees for every FDM part. Orientation, walls, infill, moisture, geometry and load conditions affect performance; heat deflection temperature is not by itself a continuous service-temperature rating.
Suggested starting profile
| Setting | Consistent official reference |
|---|---|
| Nozzle | 220-240°C |
| Bed | 60-80°C |
| Speed | 50-70 mm/s |
| Nozzle diameter | 0.4 or 0.6 mm; 0.6 mm is currently highlighted |
| Cooling | Tune by testing; the data sheet starts with high cooling |
One commercial paragraph shows different temperatures, but WINKLE's data sheet, parameter sheet and current technical block agree on 220-240°C and a 60-80°C bed. These are therefore used here. Print a temperature tower before finalising the profile.
Compatibility and use
Conditionally compatible with 1.75 mm FDM/FFF printers prepared for PETG, including HTA3D HPRO, Creality Ender 3, Prusa MK3/MK4, Bambu Lab A1/P1/X1 and Voron. WINKLE lists AMS; spool, adapter and feeder path still require checking.
It is a logical choice for prototyping, jigs, education, housings and functional series without a colour requirement. For visible parts, buy enough from one batch and test its shade first; even then, exact matching should not be assumed.
For repeatable colours, choose standard WINKLE PETG. For recycled ABS, see WINKLE ABS RE.
This is for you if
- You prioritise material recovery and cost over exact colour.
- You print prototypes, jigs or non-critical functional parts.
- Your printer supports 1.75 mm PETG with a heated bed.
This is not for you if
- You need to repeat or visually match a colour between spools.
- The part has safety-critical load, temperature or function without your own validation.
- You need fibre reinforcement, a crystal effect or fire classification.
