Search

Usage:It is possible to print directly on it, but we recommend to use the antiwarping adhesive film for a better performance. Before gluing this film, wipe it with a cloth to remove any stains and make sure that the film sticks correctly.If you only use lacquer on the upper side, the result will be ..

This spray has the function of holding the first layer of plastic on the hot bed when 3D printing begins.It is a perfect substitute for adhesive tapes and other types of union between the base or glass and the printed piece. It is also very economical to use.We recommend spraying a light layer of th..

This natural spray has the function of holding the first layer of plastic on the hot bed when 3D printing begins.It is a perfect substitute for adhesive tapes and other types of union between the base or glass and the printed piece. It is also very economical to use.We recommend spraying a light lay..

3D printing adhesive developed with 3DLAC technology now in STICK format to hold the first 3D printing layer tightly and avoid possible printing errors.3DLAC Stick is a specialized adhesive for 3D printing that prevents warping and ensures strong adhesion of the first layer throughout the entire pri..

This new adhesive offers excellent adhesion and helps to avoid and prevent warping. Its formula provides a strong and durable bond in nylon 3D prints, allowing you to obtain high quality results in your projects.FEATURES:3DNYLON stands as an adhesive product that’s in a class of its own. Specificall..

Foam thermal insulation for hot bed. It is also a strong acoustic insulator, with great absorption and damping performance.Recommendations:Clean the surface you want to paste it on.Make the insulation and the base fit tightly.Do not cover the holes in the hot bed with insulation.Protect wiring and c..

All features similar to MK2, you can also operate this board with 12 Volt or 24 Volt Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend..

All features similar to MK2 12v / 24v Volt.Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend insulating the bottom side with Thermal Insula..

Hotbed size 220x280 With countersunk holes for screw head, compatible with most Y-axis carriages, including 220x220 or 214x214 bed carriages, because of it has exactly the same spacing between holes (209mm).All features similar to MK2 12 VoltHeatbed with 3mm aluminum core. You can print directly on ..

All features similar to MK2 24V.Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory.The metallic side is the top print side and the black side is the bottom side. We recommend insulating the bottom side with Thermal Insulator.Operate at 2..

All features similar to MK2 24 VoltHeatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend insulating the bottom side with Thermal InsulatorOperate at..

The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..