Electronic

Version: 2.1TFT35 SPI, a medium size 3D printer screen.The TFT35 SPI display can work directly with Manta M4P/M5P/M8P + CB1 v2.2 without the need for additional modules.Due to the absence of an FPC IPS interface on the PI4B adapter, when using TFT 35 SPI with the PI4B + CB1 v2.2 adapter, it still re..

Very versatile graphic display, as it can be connected in two ways at the same time:It can be connected as an external screen, using the pins TX and RX (black cable) so that you have the touch menu. This connection can be used to decrease the load on the processor.You can connect the two flat cables..

Very versatile graphic display, as it can be connected in two ways at the same time:It can be connected as an external screen, using the pins TX and RX (black cable) so that you have the touch menu. This connection can be used to decrease the load on the processor.You can connect the two flat cables..

Flat thermal fuseFuses are used to ensure the integrity of the electrical devices that are in the circuit, by not allowing the passage of high currents.Melting temperature: 125ºCVoltage: 250 VAmperage: 15A..

Thermistor ideal for the Hotend. 100K ohm NTC 3950 1m wire with dupont connectorDurable 304 stainless steel capsuleDiameter 3mmDoes not need additional electronics (unlike a thermocouple)Greater precision than the normal thermistorMaximum temperature 350ºC1 Piece..

Thermistor ideal for the Hotend. 100K ohm NTC 3950 1m wire with XH connectorDurable 304 stainless steel capsuleDiameter 3mmDoes not need additional electronics (unlike a thermocouple)Greater precision than the normal thermistorMaximum temperature 350ºC1 Piece..

Thermistor ideal for the Heated Bed or Hotend. 100K ohm NTC 3950 1m wire with dupont connector1 Piece..

Thermistor ideal for the Heated Bed or Hotend. 100K ohm NTC 3950 1m wire with XH connector1 Piece..

NPN NC Type Inductive Proximity Sensor TL-Q5MC2Specs:Rated operating voltage: 12/24VDetection distance: 5mmResponse time: less than 2msInductive object: MetalSupply voltage: 6/36V DCSize: 2.8x1.7x1.7cmCord length: 1.05m..

Version V3.0Super silent drivers from Trinamic brand.Version for SPI, is designed for advanced users who know the Marlin firmware and want to test the new features.The special pins have output on the bottom and top, so you can configure the SPI using external wiring, or with the new plates as the Ra..