- Stock: 5 - 10 Days
- Model: FCMini-XH2.54-Horizontal
Model:
Mechanical 70cm cable
Mechanical with wheel 70cm cable
Mechanical with wheel 1m cable
Mini Mechanic XH2.54 Horizontal
Mini Mechanic XH2.54 Vertical
Optical 50cm cable
Compact Optical 1m cable
Mechanical KW11
Mechanical KW12-3
Mechanical D2F-5L - Omron
Mini mechanical endstop with horizontal connector, metal lever, LED indicator and an approximately 1 m cable. Its narrow PCB helps integration into 3D printers, small CNC machines and mechanisms with limited sensor clearance.
Features
- Snap-action microswitch with metal lever.
- Connector arranged horizontally, parallel to the PCB.
- Integrated LED indicator.
- Approximately 1 m cable with a catalogued XH2.54 connector.
- Two reinforced mounting holes.
Nominal dimensions
| Dimension | Value |
|---|---|
| Overall PCB width | 27 mm |
| Nominal PCB height | 13 mm |
| Mounting hole centre distance | 20 mm |
| Approximate cable length | 1 m |
Wiring and firmware
As the PCB contains an LED and electronic components, it requires supply, GND and signal. Compare the controller's XH2.54 pinout with the module before wiring: matching pitch and connector shape do not guarantee matching pin order.
- Marlin: enable the relevant MIN/MAX input and test both states with
M119. - Klipper: assign the actual GPIO in
endstop_pinand verify it withQUERY_ENDSTOPS; use!only to correct proven reversed logic. - RepRapFirmware 3: configure the input as switch type
S1withM574and invert the pin name where required.
Test the state change with motors disabled before homing. Horizontal refers to the connector orientation and does not restrict the module to a particular axis.
Compatibility
Check lever and cable clearance, 20 mm mounting centres, connector position, logic voltage and pinout. For a cable exit perpendicular to the PCB, see the vertical mini mechanical endstop.
Package contents
One horizontal mini module and one approximately 1 m cable. Bracket and mounting hardware are not included.
