Stock: In Stock
Model: Termistor100K-PT100-3mm-XH
100K NTC Beta 3950 hotend thermistor with a 3 mm cylindrical 304 stainless-steel capsule, 1 metre cable and XH connector. Its encapsulated construction provides a robust fit in heater blocks designed for cylindrical temperature sensors.
Features
100K NTC Beta 3950 thermistor.
304 stainless-stee..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Termistor100K ohm NTC 3950 cableado
100K NTC Beta 3950 thermistor for temperature measurement in hotends, heated beds and other compatible thermal control systems. It is supplied pre-wired with a 1 metre cable and a Dupont connector, making it suitable for replacement and new FDM 3D printer installations.
Features
Sensor type: NTC..
0.65€
Ex Tax:0.54€
Stock: In Stock
Model: Termistor100K ohm NTC 3950 cableado-XH
Pre-wired 100K NTC Beta 3950 thermistor for temperature measurement in compatible hotends, heated beds and thermal control projects. It includes a 1 metre cable and a 2-pin XH connector.
Features
Type: NTC thermistor.
Nominal resistance: 100K at 25 °C.
Beta value: 3950.
Cable length: 1 m.
Co..
0.65€
Ex Tax:0.54€
Stock: In Stock
Model: Resistencia 12V 40W TN2F
This 12 V 40 W heater cartridge is designed to heat the heater block of FDM 3D printer hotends. Its power output provides fast heat-up times and stable temperature control, making it compatible with a wide range of hotends that use standard heater cartridges.
Its metal construction and high-tempe..
0.95€
Ex Tax:0.79€
Stock: In Stock
Model: Resistencia 12V 50W
12 V, 50 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. It is intended for 12 V machines whose electronics, wiring and power supply can safely control its approximate 4.17 A current draw.
Compared with a 12 V, 40 W heater, this cartridge provides more power but ..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Resistencia-ceramica-Rapido2F
Replacement ceramic heating element for the Phaetus RAPIDO 2F hotend. It operates at 24 V with a nominal power of 115 W and is intended to replace the original heater during repair or maintenance.
Main features
Rated voltage: 24 V.
Rated power: 115 W.
Ceramic heating element.
1 metre silico..
10.25€
Ex Tax:8.47€
Stock: In Stock
Model: Resistencia 24V 40W
24 V, 40 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. This configuration is widely used in 24 V V6-style hotends and is suitable as a replacement when dimensions, voltage, power, cable length and electrical connection all match.
The cartridge has a metal sheat..
0.95€
Ex Tax:0.79€
Stock: In Stock
Model: Resistencia 24V 50W
24 V, 50 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. Its power rating is suitable for extrusion systems designed or properly adapted to control a 50 W load.
It can be used as a replacement or for a custom hotend assembly, but it must not be treated as a direc..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Resistencia 24V 60W
24 V, 60 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. Its 6 × 20 mm body and 1 metre cable make it suitable as a replacement or for custom assemblies that are mechanically, electrically and thermally designed for this power level.
Compared with a common lower-power cartridg..
3.50€
Ex Tax:2.89€
Stock: In Stock
Model: Termistor100K ohm NTC 3950-PT100-3mm-Dupont
100K NTC Beta 3950 hotend thermistor protected by a 3 mm cylindrical 304 stainless-steel capsule. The encapsulation provides a more robust installation than an exposed bead thermistor and fits heater blocks designed for sensors of this diameter.
Features
Type: 100K NTC Beta 3950 thermistor.
304..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: V6-fan-support
Fan mount and air duct designed to install a 30 × 30 × 10 mm 3010 axial fan on a V6-style hotend heatsink. The part clips around the side of the heatsink fins and directs the fan's airflow through them.
It is manufactured from black injection-moulded plastic. Its clip-on installation allows the f..
0.75€
Ex Tax:0.62€
Stock: In Stock
Model: Hermit-crab-V2
The BIGTREETECH Hermit Crab V2.0 CAN is a manual quick-change platform designed to keep several toolheads prepared and swap them without dismantling every carriage component. It includes one electronic fixed plate and three removable tool plates for compatible hotends, extruders, probes or other too..
158.50€
Ex Tax:130.99€