Menu
Your Cart

14-piece rod kit for Prusa i3 Rework - M10/M5 threaded and 8 mm smooth rods

14-piece rod kit for Prusa i3 Rework - M10/M5 threaded and 8 mm smooth rods
14-piece rod kit for Prusa i3 Rework - M10/M5 threaded and 8 mm smooth rods
4 reviews - Write a review
22.00€
Ex Tax: 18.18€
  • Stock: In Stock
  • Model: Prusai3-Rework-Varillas
Add to Cart
Add to Wish List
Personalized Product
This item is prepared according to the customer's requirements, therefore, the order handling time will be at least 24 to 72 hours approximately.
Fast shipping from Spain
Delivery from 24 hours and free shipping available in mainland Spain.
Stock on hand
Shipped quickly from Spain, with a full VAT invoice.
Secure & flexible payment
Pay by card, PayPal or bank transfer.
Expert technical support
Over 10 years helping customers with components and compatibility.

Set of 14 rods cut for a Prusa i3 Rework: six M10 threaded frame rods, six calibrated 8 mm stainless-steel smooth guides and two M5 stainless-steel threaded Z-axis rods.

Kit contents

QuantityTypeNominal length
2M10 threaded rod380 mm
4M10 threaded rod210 mm
2Calibrated Ø8 mm smooth rod370 mm
2Calibrated Ø8 mm smooth rod350 mm
2Calibrated Ø8 mm smooth rod320 mm
2M5 threaded rod300 mm

The smooth guides are suitable for LM8UU bearings. Ends are supplied deburred and smoothed. Manual cutting may leave approximately 1 mm over the nominal length, but not less.

Compatibility

This set matches the Prusa i3 Rework architecture using M10 frame rods and M5 threaded Z drives. Do not confuse it with revisions that replace the M5 rods with trapezoidal lead screws or change the frame dimensions.

This product is for you if

  • Your bill of materials matches all six groups in the table.
  • You need a complete frame and motion rod set.

This product is not for you if

  • Your printer only retains the Prusa i3 name but uses a different frame or Z axis.
  • You require bearings, nuts or couplers to be included.

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: calibrated, and, threaded, rod, linear, motion
Quickview
GDSTIME 4020 12 V Cooling Fan 40 × 40 × 20 mm with Hydraulic Bearing
-32 %
GDSTIME 4020 12 V Cooling Fan 40 × 40 × 20 mm with Hydraulic Bearing
Designed for active cooling in 3D printers, electronic equipment and automation systems, this GDSTIME 40 × 40 × 20 mm axial fan operates from a 12 V D..
4.75€ 3.25€ Ex Tax:2.69€
Add to Cart
Add to Wish List
Quickview
Prusa i3 Rework Printed Parts Kit
-34 %
Prusa i3 Rework Printed Parts Kit
This kit includes the printed parts required to assemble, repair or upgrade a Prusa i3 Rework 3D printer. All parts are designed to maintain compatibi..
32.00€ 21.00€ Ex Tax:17.36€
Add to Cart
Add to Wish List
Quickview
Prusa i3 Rework Fastener Kit - Screws, Nuts, Washers and Springs
-40 %
Prusa i3 Rework Fastener Kit - Screws, Nuts, Washers and Springs
Fastener kit for assembling or repairing a Prusa i3 Rework with the classic mechanical configuration based on M10 threaded rods and M5-thread Z-axis m..
20.00€ 12.00€ Ex Tax:9.92€
Add to Cart
Add to Wish List
Quickview
4010 12 V Axial Cooling Fan with 1 m Cable (40 × 40 × 10 mm)
-47 % Out of Stock
4010 12 V Axial Cooling Fan with 1 m Cable (40 × 40 × 10 mm)
This 40 × 40 × 10 mm axial cooling fan operates at 12 V DC and features a 1 metre cable, making it ideal for installations where additional cable leng..
4.25€ 2.25€ Ex Tax:1.86€
Add to Cart
Add to Wish List
Quickview
Ø8 mm AISI 304 stainless steel calibrated polished smooth rod h9 - cut to length
Ø8 mm AISI 304 stainless steel calibrated polished smooth rod h9 - cut to length
Ø8 mm calibrated smooth rod made from austenitic AISI 304 stainless steel with an h9 dimensional tolerance and polished finish. It is cut to the reque..
1.90€ Ex Tax:1.57€
Add to Cart
Add to Wish List
Quickview
Ø10 mm AISI 304 stainless steel calibrated polished smooth rod h9 - cut to length
Ø10 mm AISI 304 stainless steel calibrated polished smooth rod h9 - cut to length
Ø10 mm calibrated smooth rod made from austenitic AISI 304 stainless steel with an h9 dimensional tolerance and polished finish. It is cut to the requ..
2.70€ Ex Tax:2.23€
Add to Cart
Add to Wish List
Quickview
M8 Zinc-Plated Steel Threaded Rod – Custom Cut Length
M8 Zinc-Plated Steel Threaded Rod – Custom Cut Length
This M8 threaded rod is manufactured from zinc-plated steel and is supplied cut to the customer's requested length. It is a versatile solution for mec..
1.29€ Ex Tax:1.07€
Add to Cart
Add to Wish List
Quickview
Ø10 mm AISI 304 stainless steel calibrated polished smooth rod h9 - cut to length
Ø10 mm AISI 304 stainless steel calibrated polished smooth rod h9 - cut to length
Ø10 mm calibrated smooth rod made from austenitic AISI 304 stainless steel with an h9 dimensional tolerance and polished finish. It is cut to the requ..
2.70€ Ex Tax:2.23€
Add to Cart
Add to Wish List
Quickview
Ø12 mm AISI 304 stainless steel calibrated polished smooth rod h9 - cut to length
Ø12 mm AISI 304 stainless steel calibrated polished smooth rod h9 - cut to length
Ø12 mm calibrated smooth rod made from austenitic AISI 304 stainless steel with an h9 dimensional tolerance and polished finish. It is cut to the requ..
4.95€ Ex Tax:4.09€
Add to Cart
Add to Wish List
Quickview
Ø8 mm AISI 304 stainless steel calibrated polished smooth rod h9 - cut to length
Ø8 mm AISI 304 stainless steel calibrated polished smooth rod h9 - cut to length
Ø8 mm calibrated smooth rod made from austenitic AISI 304 stainless steel with an h9 dimensional tolerance and polished finish. It is cut to the reque..
1.90€ Ex Tax:1.57€
Add to Cart
Add to Wish List
Quickview
10-piece rod kit for JS plotter - M8 threaded and 8 mm smooth rods
10-piece rod kit for JS plotter - M8 threaded and 8 mm smooth rods
Set of 10 cut-to-size rods for building the open-source JS plotter used as HTA3D's reference. It combines M8 threaded structural rods with calibrated ..
18.95€ Ex Tax:15.66€
Add to Cart
Add to Wish List
Quickview
14-piece rod kit for wood-frame Prusa i3 - M8/M5 threaded and 8 mm smooth rods
14-piece rod kit for wood-frame Prusa i3 - M8/M5 threaded and 8 mm smooth rods
Set of 14 rods for a wood-frame Prusa i3. It contains the M8 threaded frame rods, six calibrated 8 mm stainless-steel smooth guides and two M5 stainle..
25.00€ Ex Tax:20.66€
Add to Cart
Add to Wish List
Quickview
8-piece rod kit for HyperCube Evolution HEVO 300 × 300 × 300 mm - dual Z
8-piece rod kit for HyperCube Evolution HEVO 300 × 300 × 300 mm - dual Z
Set of 8 calibrated stainless-steel smooth rods for a dual-Z HyperCube Evolution or HEVO CoreXY configuration with a nominal build volume of approxima..
59.99€ Ex Tax:49.58€
Add to Cart
Add to Wish List
Quickview
8-piece rod kit for P3Steel - 8 mm smooth and M5 threaded rods
8-piece rod kit for P3Steel - 8 mm smooth and M5 threaded rods
Complete set of 8 frame and motion rods for a P3Steel. It includes six calibrated 8 mm stainless-steel smooth rods and two M5 stainless-steel threaded..
17.00€ Ex Tax:14.05€
Add to Cart
Add to Wish List