Printed parts on PETG of the X axis of the 3DSteel printer.This kit contains:X motorX IdlerTensionerOptionally you can add:X carriageHardware kit:M3x12 screw: 7 unitsM3x20 screw: 1 unitM4x25 screw: 2 unitsM3 nut: 1 unitM4 nut: 2 unitsThe color of the printed parts is black. Material PETG...
Plate to fix 20 x 20 aluminum profiles, with "L" shaped holes facilitates and reinforces the assembly of structures that with 2020 profiles (3D printers, CNC machines, among others).Material: Aluminum AlloyNumber of holes: 5Does not include bolts or nuts.1 unit...
Plate to fix 20 x 20 aluminum profiles, with "T" shaped holes facilitates and reinforces the assembly of structures that with 2020 profiles (3D printers, CNC machines, among others).Material: Aluminum AlloyNumber of holes: 5Does not include bolts or nuts.1 unit...
Prusa i3 Rework – DIY Kit
This kit includes all the needed components for the construction
of Prusa I3 Rework.
Based on: http://reprap.org/wiki/Prusa_i3_Rework_Introduction
Composition:
Acrylic Frame
(10mm)
Rods Kit
Printed Parts
Electronics
Movement..
KIT PRUSA I3 REWORK PRINTED PARTS
Printed parts:
-Extruder (3,00mm /1,75mm):Extruder BodyExtruder IlderGears (Improvement: These
gears are helical and are specially designed for Prusa i3
Rework)Budas Adapter (Extra: With this adapter you can use
any Hotend Budas-S..
PT100 temperature sensor for high temperature and high accuracy, to be used in place of a thermistor or thermocouple. They are capable of measuring higher temperatures than thermistors (up to 300ºC), and are more accurate than thermistors and thermocouples in general.Note that this is not a thermist..
High temperature PT1000 temperature sensor.They are capable of measuring higher temperatures than thermistors (up to 400-450ºC, compared to 300ºC for the thermistor), and are more accurate than thermistors and thermocouples in general.PT1000 sensors can directly replace your printer thermistors with..
R4 Board designed to be used in Voron 0 3D printers.Characteristics:Small and compact board, size 86x48mmFour layer PCB.Trabaja con Raspberry PI Arm Cortex-M0.MCU RP2040.Fuse easy to remove in case you need to change it.Communication type C.Works at 12 or 24 V.Logic voltage: 3.3 V.Controller: TMC220..
MGN12 Linear Guide, to choose from in different lengths.It is used for precision linear movements in 3D printers and other high-end machines.We recommend greasing them with lithium grease or similar that does not damage plastics. Before greasing, we recommend cleaning and drying them.Guide / Carriag..
MGN15 Linear Guide, to choose from in different lengths.It is used for precision linear movements in 3D printers and other high-end machines.We recommend greasing them with lithium grease or similar that does not damage plastics. Before greasing, we recommend cleaning and drying them.Guide / Carriag..