8-piece rod kit for Wilson - 8 mm smooth and M5 threaded rods
18.50€
Ex Tax: 15.29€
- Stock: 49
- Model: Wilson-Varillas
Set of 8 rods for a Wilson 3D printer, containing the six 8 mm smooth guides required for the X, Y and Z axes plus two M5 threaded rods for Z-axis lift.
Contents by axis
| Quantity | Type | Length | Axis |
|---|---|---|---|
| 2 | Calibrated Ø8 mm smooth | 370 mm | X |
| 2 | Calibrated Ø8 mm smooth | 400 mm | Y |
| 2 | Calibrated Ø8 mm smooth | 350 mm | Z |
| 2 | M5 threaded | 325 mm | Z |
All rods are stainless steel. The smooth guides are calibrated and dimensionally compatible with LM8UU bearings. They are supplied deburred; manual cutting may add approximately 1 mm but will not reduce the nominal length.
Compatibility
Designed for the Wilson version using these lengths and M5 Z-axis drives. Check the bill of materials if your machine is a modification, enlargement or different revision.
This product is for you if
- You want to replace the X/Y/Z guides and both threaded Z rods on a compatible Wilson in one set.
This product is not for you if
- Your Wilson uses trapezoidal lead screws or different lengths.
- You also need bearings, nuts, couplers or supports.
