8-piece rod kit for HyperCube Evolution HEVO 300 × 300 × 300 mm - dual Z

Set of 8 calibrated stainless-steel smooth rods for a dual-Z HyperCube Evolution or HEVO CoreXY configuration with a nominal build volume of approximately 300 × 300 × 300 mm.

Kit contents

The rods are supplied deburred with sharp edges removed. Lengths are nominal: manual cutting may leave approximately 1 mm extra length, but never less than the stated dimension.

Compatibility

The HEVO community has developed many sizes and variants. This set matches the dual-Z 300 × 300 × 300 mm configuration used as HTA3D's reference; it must not be assumed compatible with every HyperCube Evolution.

If your version requires different lengths, you can assemble a custom set using our cut-to-size Ø8 mm smooth rod, Ø10 mm smooth rod and Ø12 mm smooth rod.

This product is for you if

• Your BOM specifies exactly four Ø12 × 400 mm, two Ø10 × 410 mm and two Ø8 × 450 mm rods.
• You are building the corresponding dual-Z HEVO configuration.

This product is not for you if

• Your build volume, frame, carriage or Z system uses different dimensions.
• You require bearings, supports, lead screws or profiles; these are not included.