Search

These nozzles are designed to achieve the best performance at high temperatures.Made from a special high-temperature copper alloy with a softening point well above 500 ° C, and with much higher thermal conductivity, these silver-plated copper nozzles are perfect for high-temperature applications, wh..

Composition:  2x 380mm M10 threaded rod  4x 210mm M10 threaded rod  2x 370mm Smooth rod  2x 350mm Smooth rod  2x 320mm Smooth rod  2x 300mm&n..

Composition: 2x 492mm M8 threaded rod 4x 180mm M8 threaded rod 2x 495mm Ø8mm Smooth rod 2x 470mm Ø8mm Smooth rod 2x 420mm Ø8mm Smooth r..

Teflon tube with internal diameter 1.9mm, for 1.75mm filament.The inner walls of the tube are very smooth, which guarantees a high control over the flow.Due to its internal diameter of 1.9mm it is used for direct extruders, not recommended for use in bowden extruders.Features: It is made of pol..

Rockwool Thermal insulation is used for heater block of the Hotend, helping to maintain the temperature. Thermal behaviorThe structure of the rockwool contains dry and stable air inside, which acts as a barrier to heat transfer characterized by its low thermal conductivity, which i..

Rod kit for the popular CoreXY HyperCube Evolution model, HEVO, if you need other lengths for the different variants, please do not hesitate to contact us.Composition:4x Rods diameter 12 length 400mm2x Rods diameter 10 length 410mm2x Rods diameter 8 length 450mmQuality:The smooth rods are calibrated..

Double pulleys for bondtech extruders, this filament thrust system has proven to be one of the most powerful and reliable. By exerting force on the filament on both sides it is capable of transferring twice as much force as a single pulley, decreasing the possibility that the filament rests on the p..

Very high quality bondtech double pulley, they have been machined with extreme precision. The teeth are very sharp, which guarantees grip and does not slide easily.Made of hardened steel and then treated with nickel plating, which greatly improves the durability and reliability of the teeth.The bond..

FYSETC Sherpa V1.5 extruder.Small size Sherpa extruder, dual gear filament gripping system designed for use with any printer.It features a 6.25:1 gear-driven design to provide torque with near-silent operation. For best results it is recommended to adjust it for your printer.Using an SLS printed she..

Stainless steel nozzles are ideal for abrasive materials that wear out normal nozzles. Stainless steel has approximately 3 times the abrasion resistance of brass. They are often recommended for printing food or medical products.These nozzles perform the function of extrusion of melted plastic in 3D ..

Stainless steel nozzles are ideal for abrasive materials that wear out normal nozzles. Stainless steel has approximately 3 times the abrasion resistance of brass. They are often recommended for printing food or medical products.These nozzles perform the function of extrusion of melted plastic in 3D ..

TBG-Air LDO motor extruder, a smart, light and fast extruder.Features:V6 Version.Dual Gear drive, made if hardened steel..Large size drive gear greater grip force (20mm diameter): The entire internal main structure of the TBG-AIR extruder consists of three large gears. The huge gears and the super d..