-25 %
Stock: In Stock
Model: Kossel
This printed parts kit is designed for Kossel-style 3D printers, following the original RepRap Kossel design. To maximise performance and durability, the structural components are manufactured in high-quality PLA, while the parts located close to the hotend are printed in ABS to provide improved hea..
39.99€ 29.99€
Ex Tax:24.79€
Stock: In Stock
Model: Nevermore-Stealthmax
A set of printed parts for building an original Nevermore StealthMax 300, a recirculating filtration system intended for enclosed 3D printers. This is the larger regular version, designed around an approximately 2-litre media basket, two Xiaomi Mijia G1-compatible HEPA filters and the Delta fan spec..
90.00€
Ex Tax:74.38€
Stock: In Stock
Model: Nevermore-StealthMaxS
A set of printed parts for building an original Nevermore StealthMax S 250, the compact version of the StealthMax recirculating filtration system. Its main components can be manufactured on a 250 × 250 mm bed, while retaining activated-carbon and HEPA filtration in an assembly approximately 20% smal..
75.00€
Ex Tax:61.98€
-30 %
Stock: In Stock
Model: Eje-Y-3DSteel-V2
A set of PETG printed parts for building or repairing the HTA3D 3DSteel V2 Y axis. It includes the linear-bearing holders, motor-mount spacers and belt anchor used by the original design.
This is a machine-specific mechanical subset rather than a universal kit for every P3Steel or Prusa i3 Steel...
5.00€ 3.50€
Ex Tax:2.89€
-20 %
Stock: In Stock
Model: CajaRamps-3DSteel
Printed enclosure designed to install and protect the RAMPS 1.4-based electronics used by the HTA3D 3DSteel 3D printer.
Its geometry allows it to be attached to the machine frame, keeps the electronic components protected and provides room for organising surplus wiring. It is printed in PLA.
..
7.50€ 6.00€
Ex Tax:4.96€
-20 %
Stock: In Stock
Model: Caja-Electronica-3DSteel-V2
Printed enclosure designed to install and protect the BIGTREETECH SKR V1.4 board used by the HTA3D 3DSteel V2 3D printer.
It attaches to the machine frame and helps keep the electronics protected and the wiring organised. It is printed in PLA, with geometry designed for the SKR 1.4 installation u..
7.50€ 6.00€
Ex Tax:4.96€
-20 %
Stock: In Stock
Model: Protector-fuente-3Dsteel
Printed-part set designed to protect the power-supply connections used on the original HTA3D 3DSteel. It consists of a base and a ventilated cover that provide access during installation while reducing accidental exposure to the terminals.
The cover is prepared for a switched IEC mains inlet, all..
7.50€ 6.00€
Ex Tax:4.96€
-34 %
Stock: In Stock
Model: Prusai3-Rework
This kit includes the printed parts required to assemble, repair or upgrade a Prusa i3 Rework 3D printer. All parts are designed to maintain compatibility with this printer model while incorporating several improvements over the original design to simplify assembly and enhance overall performance.
..
32.00€ 21.00€
Ex Tax:17.36€
-24 %
Stock: In Stock
Model: Stealthburner
A printed-parts kit for Voron Stealthburner Beta with the Clockwork 2 extruder, prepared with the selected material, colours and hotend cartridge. It is intended for building or repairing this historical revision of the Voron toolhead without printing its main components yourself.
Stealthburner i..
25.00€ 19.00€
Ex Tax:15.70€
Stock: In Stock
Model: L3K-Extrusor
The Wade-L3K is a geared direct extruder based on the Greg's Wade architecture and developed for Prusa i3 printers and RepRap projects. A NEMA 17 motor drives a 10-tooth pinion meshing with a 43-tooth gear, providing a nominal 4.3:1 reduction.
Filament is driven by an M8 hobbed bolt and pressed a..
13.49€
Ex Tax:11.15€
Stock: In Stock
Model: Piezas impresas - P3Steel por HTA3D
This set includes the printed parts required to assemble the single-extrusion P3Steel developed by HTA3D. The parts are designed to work together with the steel frame and mechanical configuration used in our P3Steel kit.
It is suitable for building, repairing or updating an HTA3D P3Steel without ..
28.00€
Ex Tax:23.14€
Stock: In Stock
Model: Piezas impresas - P3Steel dual por HTA3D
This set contains the printed parts specifically designed for the HTA3D P3Steel Dual. It includes the components required for the dual-extrusion mechanical configuration and auxiliary parts adapted to our P3Steel steel frame.
It is intended for building, repairing or updating an HTA3D P3Steel Dua..
24.00€
Ex Tax:19.83€