Menu
Your Cart

POWGE 1.5GT 26T-size smooth idler for 10 mm belt, 3 mm bore

POWGE 1.5GT 26T-size smooth idler for 10 mm belt, 3 mm bore
POWGE 1.5GT 26T-size smooth idler for 10 mm belt, 3 mm bore
New
POWGE 1.5GT 26T-size smooth idler for 10 mm belt, 3 mm bore
POWGE 1.5GT 26T-size smooth idler for 10 mm belt, 3 mm bore
POWGE 1.5GT 26T-size smooth idler for 10 mm belt, 3 mm bore
4.95€
Ex Tax: 4.09€
  • Stock: 25
  • Model: POWGE-15GT-S-10-3
Fast shipping from Spain
Delivery from 24 hours and free shipping available in mainland Spain.
Stock on hand
Shipped quickly from Spain, with a full VAT invoice.
Secure & flexible payment
Pay by card, PayPal or bank transfer.
Expert technical support
Over 10 years helping customers with components and compatibility.

POWGE 1.5GT 26T-size smooth idler for 10 mm belt, 3 mm bore. Guides the back of the belt.

Features and dimensions

  • Smooth running surface for the back of 10 mm belts.
  • Nominal size corresponding to the 26-tooth 1.5GT toothed idler. The running surface is smooth: 26T identifies the size family, not a tooth count or identical dimensions.
  • For 10 mm belts; 3 mm bore.

Compatibility and installation

Clamp the inner bearing race without trapping the rotating body. Centre the running surface with spacers and check that the pulley spins freely before tensioning.

This pulley does not mesh with the teeth or set the axis travel. Check the running diameter, flanges and clearance between the supports.

Contents: one pulley.

Depending on the production batch, the aluminium body may or may not carry the POWGE engraving.

Choose this if…

The back of the 10 mm belt runs over the idler and the mount has a 3 mm shaft.

Skip this if…

The toothed side runs over the pulley, or you need it to drive from the motor shaft.

Write a review

Note: HTML is not translated!
Bad Good
Loading the security check…