-17 %
Printed parts for extruder HTA3D V2
12.00€
9.95€
Tax 8.22€
- Stock: In Stock
- Model: Piezas impresas - HTA3D Extruder V2
Printed parts for extruder HTA3D V2
-20 %
TENAFLEX, Tenacious and flexible. Super resistant to bending, tension, compression, temperature and tearing. Highest quality finish, colour and gloss ..
10.95€ 8.75€
Ex Tax:7.23€
Bolts:3x M3x84x M3x124x M3x141x M3x164x M3x206x M3x351x M3x40 - with a coil and 2 washers4x M4x25Nuts: 4x M34x M4..
2.50€
Ex Tax:2.07€
-86 %
Double pulleys for bondtech extruders, this filament thrust system has proven to be one of the most powerful and reliable. By exerting force on the fi..
55.00€ 7.45€
Ex Tax:6.16€
Only a few units in stock
-65 %
Limit switch with wheel, 1 meter cable and 3-pin connector
1 Piece..
4.00€ 1.39€
Ex Tax:1.15€
-37 %
KIT P3STEEL PRINTED PARTS
Components:
-Extruder:
Body, ildler and budas adaptor
&n..
24.00€ 15.00€
Ex Tax:12.40€
-25 %
KIT KOSSEL PLA+ABS PRINTED PARTS Based on: http://reprap.org/wiki/Kossel
This kit is printed pieces following ..
39.99€ 29.99€
Ex Tax:24.79€
-34 %
KIT PRUSA I3 REWORK PRINTED PARTS
Printed parts:
-Extruder (3,00mm /1,75mm):Extruder BodyExtruder IlderGears (Improvement:..
32.00€ 21.00€
Ex Tax:17.36€
-35 %
ITOPIE PRINTED PARTS KIT Basado en: http://reprap.org/wiki/ITopie
Components: -Extruder (3mm/ 1.75mm)
-Extruder..
24.00€ 15.50€
Ex Tax:12.81€
-29 %
KIT PRUSA I3 ABS PRINTED PARTS
- BOXED STYLE FRAME Based on:
http://78.47.92.212/i3_documentation_pics/singlepage..
34.00€ 24.00€
Ex Tax:19.83€
-68 %
Hobbed Bolt for 3D printer, based on Reprap community design: http://reprap.org/wiki/Wade's_Geared_Extruder#The_Hobbed_Bolt
M8 x 60mm knu..
8.99€ 2.85€
Ex Tax:2.36€
-37 %
KIT P3STEEL PRINTED PARTS
Components:
-Extruder:
Body, ildler and budas adaptor
&n..
24.00€ 15.00€
Ex Tax:12.40€
-35 %
ITOPIE PRINTED PARTS KIT Basado en: http://reprap.org/wiki/ITopie
Components: -Extruder (3mm/ 1.75mm)
-Extruder..
24.00€ 15.50€
Ex Tax:12.81€
-29 %
KIT PRUSA I3 ABS PRINTED PARTS
- BOXED STYLE FRAME Based on:
http://78.47.92.212/i3_documentation_pics/singlepage..
34.00€ 24.00€
Ex Tax:19.83€
-19 %
PRUSA I3 PRINTED PARTS
KIT Based on: http://reprap.org/wiki/Prusa_i3 In
this selecion of parts we try to keep..
25.99€ 20.99€
Ex Tax:17.35€
Check out this bundle
Contains the necessary components to assemble upgrade our extruder to HTA3D V2 following the assembly instructions:https://wikifab.org/wiki/Montaje_Ex..
It contains the components necessary to assemble our HTA3D V2 extruder according to the assembly instructions:https://wikifab.org/wiki/Montaje_Extruso..
3010 Fan - 12v - 1m wire
1.59€
4020 Fan 12v
1.49€
Related Posts
15 Jul
6
4964
We have based our new 3DSteel model on the popular P3Steel kit, keeping the same frame and rods, as well as many other components to allow the upgrade to this new version.We have prepared different packs, so you can make a total or partial update with the greatest comfort and flexibility possible. Next, you will find the different parts that you ca..