Menu
Your Cart

HTA3D

Stock: In Stock Model: HTA3D-DUAL-EXTRUDER
Based on: https://www.thingiverse.com/thing:2228901 Extruder kit content (configurable):Hotend Chimera style. Equipped with fan 3010,2x 40w heating cartridges, 2x NTC 100kΩ thermistors, Teflon tube and 4 BSP connectors PC04-1 2x Motors Nema 17 - length 40mm - with 1..
95.00€ 73.50€ Ex Tax:60.74€
3DSteel - 3D Printer - Evolution of P3Steel / Prusa i3 Steel 3DSteel - 3D Printer - Evolution of P3Steel / Prusa i3 Steel
New Recommended -31 %
Stock: In Stock Model: 3DSteel
Main Features:Pre-assembled kit without weldsFast and very easy assembly, which does not require knowledge of electronics or mechanics.We have simplified the assembly by sending preassembled parts:Extruder fully assembled with connections prepared.Welded heated bed, with prepared connections and the..
650.00€ 450.00€ Ex Tax:371.90€
Stock: In Stock Model: P3STEEL-DUAL
DUAL P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the P3STEEL redesigned by HTA3D.Due to its performance this is the model we use for our printings.Features:Printing volume: 200x200x200 (XYZ).Maximum printing speed recommended: 160x160x3 mm/s.Compatible with a..
530.00€ 325.00€ Ex Tax:268.60€
P3STEEL by HTA3D - DIY Kit P3STEEL by HTA3D - DIY Kit
Hot Sales -37 %
Stock: In Stock Model: P3STEEL
P3STEEL by HTA3D – DIYThis kit contains the necessary parts to build the P3STEEL redesigned by HTA3D.Due to its performance this is the model we use for our printings.Features:Printing volume: 200x200x210 (XYZ).Maximum printing speed recommended: 160x160x3 mm/s.Compatible with all 1...
475.00€ 299.00€ Ex Tax:247.11€
Stock: In Stock Model: Prusa-i3-Rework
Prusa i3 Rework – DIY Kit This kit includes all the needed components for the construction of Prusa I3 Rework. Based on: http://reprap.org/wiki/Prusa_i3_Rework_Introduction   Composition: Acrylic Frame (10mm) Rods Kit Printed Parts Electronics Movement..
350.00€ 250.00€ Ex Tax:206.61€
Calibrated smooth rod diameter 10mm - Cut to size
Hot Sales
Stock: In Stock Model: Rod-D10
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. To order: Select the range of measurement desired ..
2.40€ Ex Tax:1.98€
Stock: In Stock Model: Rod-D12
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. To order: Select the range of measurement desired ..
3.45€ Ex Tax:2.85€
Calibrated smooth rod diameter 8mm - Cut to size
Hot Sales
Stock: In Stock Model: Rod-D8
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm / m.To or..
1.90€ Ex Tax:1.57€
Stock: In Stock Model: Rod-M10
Material: Zinc-plated steel Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. To order: Select the range of measurement desired Enter in mm the mea..
1.50€ Ex Tax:1.24€
Stock: In Stock Model: Rod-M8
Material: Zinc-plated steel Precision cutting: cutting is done by hand, so mesure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. To order: Select the range of measurement desired Enter in mm the measurem..
1.39€ Ex Tax:1.15€
Stock: In Stock Model: M8x60 DIN 913 ISO 4014 8.8
Hobbed Bolt for 3D printer, based on Reprap community design:  http://reprap.org/wiki/Wade's_Geared_Extruder#The_Hobbed_Bolt  M8 x 60mm knurled at a standard meassure, 25mm from the head of the bolt aproximately. This features are adapted to the last versions of Greg's Wade extruder, ..
8.99€ 2.85€ Ex Tax:2.36€
Stock: In Stock Model: Piezas impresas - P3Steel dual por HTA3D
Contains all the necessary parts to mount our Dual P3Steel kit by HTA3D, they are compatible with our steel frame.Content:Extruder (1,75mm):2x Body2x Extruder IdlerHotend supportLayer fan 4020 supportX axis:X Motor and X ilder, with tensioner for F624zz bearingX axis carriageX axis endstop supp..
24.00€ Ex Tax:19.83€
Showing 1 to 12 of 20 (2 Pages)