HTA3D Dual Extruder for P3Steel - Mk8 and Chimera Style

Based on:


Extruder kit content (configurable):

  • Hotend Chimera style. Equipped with fan 3010,2x 40w heating cartridges, 2x NTC 100kΩ thermistors, Teflon tube and 4 BSP connectors PC04-1
  • 2x Motors Nema 17 - length 40mm - with 1m cable and dupont connector
  • Printed Parts
    • Extruders left and right, X carriage, Hotend support, Layer Fan support, X limit switch support and mosfet module support.
  •  2x Mk8 pulley 1.75m
  • 2x 608zz y 2x mr105zz bearings
  • Screws:
    • 3x M3x8
    • 2x M3x12
    • 3x M3x16
    • 4x M3x20
    • 6x M3x25
    • 4x M3x35 - Con muelle y arandelas.
    • 4x M4x25
    • 2x M8x20
  • Nuts:
    • 6x M3
    • 4x M4


  • Additional mosfet module
    • Adds an additional mosfet module to control the layer fan in Ramps 1.4
  • Layer fan
    • Adds a 4020 layer fan that is used to cool the part while printing.

Write a review

Note: HTML is not translated!
    Bad           Good

Custom products

This product is prepared according to the customer requirements, thus, the handling time is between 24 and 48 hours approximately.

  • Views: 2582
  • Brand: HTA3D
  • Product Code: HTA3D-DUAL-EXTRUDER
  • Availability: In Stock
  • 95.00€
  • 73.50€
  • Ex Tax: 60.74€

Available Options

Tags: Assembled Extruders, Extruder,