New
Stock: In Stock
Model: MELLOW-SHT36-V3P
The Mellow FLY SHT36 V3 Plus brings extruder motor, heater, fan and sensor connections together on the printhead. Its CAN or RS232 link carries power and communication over four conductors, reducing the wiring harness travelling with the toolhead and helping create a tidier installation.
The defini..
34.95€
Ex Tax:28.88€
New
Stock: In Stock
Model: MELLOW-TMC2209
The Mellow FLY TMC2209 is a StepStick-format driver for bipolar stepper motors, with STEP/DIR motion control and UART configuration. It combines the TMC2209's features with an enlarged heatsink contact area and a small underside switch for DIAG. A blue heatsink is included.
An option for building o..
3.99€
Ex Tax:3.30€
New
Stock: In Stock
Model: MELLOW-GOLIATH-AIR-V2
The Mellow Goliath AIR V2 is a high-flow hotend developed by the VzBoT team and manufactured by Mellow for 3D printers that need to melt a substantial volume of filament consistently. It combines a long nickel-plated copper heater block, distributed 100 W heating at 24 V and a copper/zirconia heatbr..
159.95€
Ex Tax:132.19€
New
Stock: In Stock
Model: MELLOW-GT2-20T-6-5
Mellow GT2 20-tooth drive pulley for a 6 mm belt and 5 mm shaft, manufactured from aluminium alloy. It transfers motor rotation to a 2 mm-pitch timing belt, providing a theoretical belt travel of 40 mm per pulley revolution.
The 7 mm-wide toothed track provides clearance for a 6 mm belt, while the ..
3.95€
Ex Tax:3.26€
New
Stock: In Stock
Model: MELLOW-GT2-20T-10-5
Mellow GT2 20-tooth drive pulley for 9 and 10 mm belts and a 5 mm shaft, manufactured from aluminium alloy. Its 11 mm-wide toothed track identifies the wider version, with a nominal overall height of 20 mm.
It transfers motor rotation to a 2 mm-pitch GT2 belt. Each pulley revolution provides a theo..
4.50€
Ex Tax:3.72€
New
Stock: In Stock
Model: MELLOW-IDLER-10-5
The Mellow smooth idler pulley for 10 mm belts combines a CNC-machined aluminium body with two ball bearings and an internal brass core. It is designed for builders who also pay attention to the guiding points in their belt drive: consistent motion depends not only on the motors and belts, but also ..
5.50€
Ex Tax:4.55€
New
Stock: In Stock
Model: MELLOW-IDLER-6-5
The Mellow smooth idler pulley for 6 mm belts combines a CNC-machined aluminium body with two ball bearings and an internal brass core. It is designed for builders who also pay attention to the guiding points in their belt drive: consistent motion depends not only on the motors and belts, but also o..
4.50€
Ex Tax:3.72€