New
Stock: In Stock
Model: MELLOW-SEXBOLT-Z
The Mellow Hartk Sexbolt is a Z-endstop assembly for Voron 2.4 and Trident printers that use a fixed nozzle-actuated pin to establish their height reference. It combines the moulded housing, microswitch PCB and pin guide in a compact unit, avoiding the need to source and assemble the housing and end..
12.95€
Ex Tax:10.70€
New
Stock: In Stock
Model: MELLOW-PT1000
The Mellow PT1000 is a platinum temperature sensor housed in a 3 × 15 mm metal cartridge, supplied with a 1.5 m cable. It measures heater-block temperature and provides an alternative to NTC thermistors in hotends designed for cartridge sensors. Mellow specifies a 0–450 °C measurement range.
Its us..
11.95€
Ex Tax:9.88€
New
Stock: In Stock
Model: MELLOW-15GT-21T-10-5
The Mellow 1.5GT 21T drive pulley for 10 mm belts transfers motor rotation to a synchronous belt with a 1.5 mm pitch. Its aluminium body and shaft-fixing hub make it suitable for a matched 1.5GT drive in a 3D printer, small CNC motion system or custom automation project.
This is a motor drive pulle..
4.95€
Ex Tax:4.09€
New
Stock: In Stock
Model: MELLOW-15GT-21T-6-5
The Mellow 1.5GT 21T drive pulley for 6 mm belts transfers motor rotation to a synchronous belt with a 1.5 mm pitch. Its aluminium body and shaft-fixing hub make it suitable for a matched 1.5GT drive in a 3D printer, small CNC motion system or custom automation project.
This is a motor drive pulley..
4.50€
Ex Tax:3.72€
New
Stock: In Stock
Model: MELLOW-15GT-27T-10-5
The Mellow 1.5GT 27T drive pulley for 9 or 10 mm belts transfers motor rotation to a synchronous belt with a 1.5 mm pitch. Its aluminium body and shaft-fixing hub make it suitable for a matched 1.5GT drive in a 3D printer, small CNC motion system or custom automation project.
This is a motor drive ..
5.50€
Ex Tax:4.55€
New
Stock: In Stock
Model: MELLOW-15GT-27T-6-5
The Mellow 1.5GT 27T drive pulley for 6 mm belts transfers motor rotation to a synchronous belt with a 1.5 mm pitch. Its aluminium body and shaft-fixing hub make it suitable for a matched 1.5GT drive in a 3D printer, small CNC motion system or custom automation project.
This is a motor drive pulley..
4.95€
Ex Tax:4.09€
New
Stock: In Stock
Model: MELLOW-15GT-I27-10-5
The Mellow 1.5GT 27T toothed idler for 9 or 10 mm belts guides the toothed face of a matching belt through turns in a motion system. Its aluminium body, integrated bearing support and 5 mm mounting bore make it a compact component for a new 1.5GT drive or a carefully planned conversion from 2GT.
Th..
5.95€
Ex Tax:4.92€
New
Stock: In Stock
Model: MELLOW-15GT-I27-6-5
The Mellow 1.5GT 27T toothed idler for 6 mm belts guides the toothed face of a matching belt through turns in a motion system. Its aluminium body, integrated bearing support and 5 mm mounting bore make it a compact component for a new 1.5GT drive or a carefully planned conversion from 2GT.
This is ..
5.50€
Ex Tax:4.55€
New
Stock: In Stock
Model: MELLOW-CAN-EXP
The Mellow FLY CANBus Expand organises connections for up to four CAN boards and distributes their power from one common point. It is useful for 3D printers with toolhead electronics, multi-tool projects and installations where accessible, labelled connections are preferable to scattered wire splice..
11.95€
Ex Tax:9.88€
New
Stock: In Stock
Model: MELLOW-ADXL345-USB
The Mellow FLY ADXL345 USB is a compact accelerometer for measuring a 3D printer's resonances with Klipper and tuning Input Shaper. It combines a three-axis ADXL345 sensor and an RP2040 microcontroller on a USB-C board: measurements are acquired locally and sent over USB to the computer running Klip..
9.99€
Ex Tax:8.26€
New
Stock: In Stock
Model: MELLOW-C8P-M2WE
The Mellow FLY C8Pro with M2WE combines the computer running Klipper and the motion-control electronics on one board. It features a quad-core Allwinner H618 with 1 GB RAM, an STM32H723 ARM Cortex-M7, eight independent driver sockets and connections for heaters, fans, probes and CAN toolboards.
This..
114.95€
Ex Tax:95.00€
New
Stock: In Stock
Model: MELLOW-E3U-H723
The Mellow FLY E3 PRO Ultra H723 is a 32-bit 3D printer mainboard with five integrated TMC2209 drivers, an STM32H723 processor, USB-C and CAN connectivity. It combines the compact Ender 3-style footprint with resources for two extruders, bed-leveling probes and expansion through a toolhead board.
T..
53.99€
Ex Tax:44.62€