Stock: In Stock
Model: Tuerca ajuste M3
M3 knurled nut designed to simplify manual heated-bed adjustment. Its ridged outer edge can be turned by hand to change spring or spacer compression without holding a conventional hexagonal nut with a tool.
Features and dimensions
Thread: M3.
Maximum outside diameter: approximately 10.7..
0.11€
Ex Tax:0.09€
Stock: In Stock
Model: Aislante-Térmico
This thermal insulation pad is designed to reduce heat loss from the underside of a heated bed, improving thermal efficiency and helping maintain a more stable printing temperature.
Features
Multi-layer thermal insulation structure.
Reduces heat loss from the heated bed.
Helps ..
1.50€
Ex Tax:1.24€
-8 %
Stock: In Stock
Model: Relé 10A Omron
Omron G3NB-210B-1 solid-state relay for controlling AC loads from a 5 to 24 V DC signal. Its 24 to 220 V AC output is particularly suitable for resistive heaters, automation and properly protected mains-powered heated beds.
Main specifications
ReferenceOmron G3NB-21..
15.00€ 13.75€
Ex Tax:11.36€
Stock: In Stock
Model: Adhesive-Foam
Self-adhesive thermal insulation for the underside of a heated bed, combining a foam layer, an aluminium-finished surface and an adhesive backing. Its nominal format suits many square 3D-printer beds, provided that their dimensions, mounting holes and cable position are checked first.
By reducing..
1.95€
Ex Tax:1.61€
Stock: In Stock
Model: Silicona-18mm
Silicone damping spacer for mounting a heated bed on a 3D printer’s Y carriage. Its semi-rigid body maintains the distance between both components while allowing a limited amount of compression for adjustment.
It may replace conventional springs when a less elastic mounting arrangement with reduc..
0.95€
Ex Tax:0.79€
-21 %
Stock: In Stock
Model: Relé-10A
SSR-40DA solid-state relay for controlling an AC load from a 3 to 32 V DC signal. The unit is marked for a 24 to 380 V AC output and a nominal current of 40 A.
Confirmed unit data
TypeSSR-40DA: DC control and AC load
Control input3–32 V DC
Output24–380..
10.75€ 8.50€
Ex Tax:7.02€
Stock: In Stock
Model: Pinza-abrazadera
Stainless steel spring clip designed to secure a removable glass, mirror or other rigid build surface to a 3D printer heated bed.
Its narrow design occupies little space around the edge of the build surface and can be fitted or removed without screws. Clamping pressure is provided by the elastici..
0.75€
Ex Tax:0.62€
Stock: In Stock
Model: Aislante-Térmico-PET
Flexible thermal insulation designed for installation underneath a 3D printer heated bed. Its three-layer construction helps reduce downward heat loss, contributing to more efficient heating and improved temperature stability.
This is a passive component: it requires no electrical power and may b..
1.19€
Ex Tax:0.98€
Stock: In Stock
Model: Mosfet25A-Modulo
V1.3 external MOSFET module designed to switch a 12 or 24V DC heated bed or another resistive load from a controller board's heater output. The control input is separate from the power terminals and the power transistor has its own heatsink.
It is particularly useful where heated-bed current shou..
2.99€
Ex Tax:2.47€