Stock: In Stock
Model: Espaciadores-MK52
FYSETC spacer and screw kit for mounting a nine-point MK52 heated bed on its Y carriage. The spacers establish a consistent rigid distance between both components, replacing the springs used by many four-point adjustable beds.
The arrangement follows the traditional system used by the Original Pr..
2.99€
Ex Tax:2.47€
Stock: In Stock
Model: GT2-16T-ID5
This 16-tooth GT2 pulley is designed for motion transmission using 6 mm wide GT2 timing belts. Manufactured from aluminum, it provides lightweight and accurate performance for 3D printers, CNC machines, automation equipment and other belt-driven systems.
Features
16-tooth GT2 timing pull..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: GT2-16T-ID5-10mm
GT2 16-tooth drive pulley for 9 and 10 mm belts, made of aluminium and designed to be secured to a 5 mm shaft with two grub screws.
Unlike a bearing-mounted idler, this pulley is locked to the shaft and directly transmits motor rotation to the belt. Its 16-tooth format provides a compact transmis..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: GT2-16T-ID3-W-Bearing
GT2 16-tooth idler pulley with an integrated bearing, designed to guide or tension 6 mm GT2 timing belts in 3D printers, CNC machines and other linear motion systems.
As this is a toothed pulley, it should run against the toothed side of the belt. Its side flanges help keep the belt within the ru..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: GT2-16T-ID3-10mm-Bearing
GT2 16-tooth idler pulley with an integrated bearing, designed to guide or tension the toothed side of 9 and 10 mm GT2 belts on a nominal 3 mm axle or screw.
Its 16-tooth format provides a compact belt path, while the side flanges help keep the belt within the engagement area when the system is c..
2.67€
Ex Tax:2.21€
Stock: In Stock
Model: GT2-20T-ID5-10mm
GT2 20-tooth drive pulley for 9 and 10 mm belts, made of aluminium and designed to be secured to a 5 mm shaft with two M2 grub screws.
The pulley is locked to the motor shaft and directly transfers movement to the belt. The 20-tooth format provides more linear travel per revolution and a larger b..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: GT2-20T-ID3-W-Bearing
GT2 20-tooth idler pulley with an integrated bearing, suitable for guiding and tensioning 6 mm GT2 belts on a nominal 3 mm axle or screw.
The teeth engage with the toothed side of the belt, while the side flanges help maintain its position. The bearing allows the pulley to rotate freely instead o..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: GT2-20T-ID5-W-Bearing
GT2 20-tooth idler pulley for 6 mm belts, with an integrated bearing, aluminium body and nominal 5 mm bore. It is intended for assemblies where the toothed side of the belt must contact a pulley with the matching profile.
Nominal specifications
Profile: GT2, 2 mm pitch.
Contact surface: tooth..
0.99€
Ex Tax:0.82€
Only a few units in stock
-60 %
Stock: In Stock
Model: GT2-36T-ID5
GT2 36-tooth timing pulley for 6 mm belts and 5 mm shafts, made of aluminium and fitted with a hub for grub-screw fastening.
It can be used as a large drive pulley or as a driven pulley in a belt reduction. Its function and required configuration depend on its position within the transmission.
..
5.00€ 1.99€
Ex Tax:1.64€
Stock: In Stock
Model: GT2-16T-ID3-W-Bearing-NoTeeth
Smooth idler pulley with an integrated bearing and a nominal 16T-equivalent size, designed to guide or tension 6 mm GT2 belts when the smooth back of the belt contacts the pulley.
Its compact format is useful in 3D printers, CNC machines and motion mechanisms with limited space. The side flanges ..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: GT2-16T-smooth-ID3-10mm-Bearing
Smooth idler pulley with an integrated bearing and a nominal 16T-equivalent size, designed to guide or tension the back of 9 and 10 mm GT2 belts on a 3 mm axle or screw.
Its compact format allows belt returns in mechanisms with limited space. The smooth surface should contact the back of the belt..
2.67€
Ex Tax:2.21€
Stock: In Stock
Model: GT2-20T-noteeth-ID3-10mm-Bearing
Smooth idler pulley with an integrated bearing, a nominal 20T-equivalent size and a 3 mm bore, designed to guide the back of a 10 mm GT2 belt.
It is suitable for tensioners, returns and guides where the smooth outside of the belt is the contact surface. The side flanges help keep the belt centred..
0.99€
Ex Tax:0.82€