Out of Stock
Stock: Out of Stock
Model: Lock-collar-8mm
Stainless steel locking collar for axially securing an 8 mm rod. It can be used as a mechanical stop or to limit rod movement within a mechanical assembly.
Specifications
Material: stainless steel.
Inner diameter: 8 mm.
Outer diameter: 14 mm.
Width: 7 mm.
Quantity: 1 piece.
Compatibil..
0.35€
Ex Tax:0.29€
Stock: In Stock
Model: Rigid-8x8
Designed to directly connect two 8 mm shafts, this rigid shaft coupling provides a solid, backlash-free connection between the motor and the driven component. It is intended for applications where both shafts are accurately aligned and maximum torsional rigidity is required.
Machined from alumini..
0.89€
Ex Tax:0.74€
Only a few units in stock
-18 %
Stock: In Stock
Model: BTT-CB1
The BIGTREETECH CB1 V2.2 with 1 GB RAM is a compact computer module designed to run Linux and act as a host for Klipper, Moonraker and Mainsail on compatible carrier boards. It combines a quad-core 1.5 GHz Allwinner H616 Cortex-A53 processor with 2.4 GHz Wi-Fi and provides the signals required for a..
36.75€ 29.99€
Ex Tax:24.79€
Stock: In Stock
Model: Rueda-Vslot-MR115zz
Compact wheel for compatible V-Slot guiding systems, manufactured from POM and fitted with an MR115ZZ bearing. Its 15 mm outer diameter makes it suitable for mechanisms designed around a smaller wheel than the common 24 mm formats.
The outer running surface has bevelled edges and a 5 mm central s..
1.25€
Ex Tax:1.03€
Stock: In Stock
Model: Muelle-01
Helical compression spring with a nominal 4mm inside diameter, available in several lengths. It may be used in adjustable 3D-printer mechanisms, extruders, heated beds and mechanical projects that require pressure between two components.
Its continuous format allows a suitable section to be selec..
0.17€
Ex Tax:0.14€
Stock: In Stock
Model: DIN-125-1a-arandela
Standard zinc-plated steel flat washer designed to distribute the clamping load beneath a screw head or nut and reduce direct contact with the mounting surface.
Its geometry follows the dimensional references of DIN 125-1 form A and ISO 7089. It is a versatile choice for mechanical assemblies, st..
0.00€
Ex Tax:0.00€
Stock: In Stock
Model: DIN-127b-arandela
Split helical spring washer manufactured from steel, with geometry corresponding to the traditional DIN 127 form B reference.
Its shape produces an elastic reaction when compressed during tightening. It is mainly used as a replacement part in existing assemblies or in conventional mechanical appl..
0.00€
Ex Tax:0.00€
Stock: In Stock
Model: DIN-7991-Tornillo-pav
DIN 7991 / ISO 10642 countersunk hex socket screw, manufactured from class 10.9 steel with a black oxide finish. Its flat 90° countersunk head can sit flush with the surface when installed in a compatible countersunk hole.
It is suitable for plates, brackets, guides, enclosures, profiles and mech..
0.00€
Ex Tax:0.00€
Stock: In Stock
Model: din-9021-plana-b
Large-series flat washer manufactured from zinc-plated steel. Its outside diameter is considerably larger than that of a conventional flat washer for the same thread size, allowing the clamping force to be distributed over a wider area.
Its geometry follows the dimensional references of DIN 9021 ..
0.00€
Ex Tax:0.00€
Stock: In Stock
Model: DIN-912-Tornillo
DIN 912 / ISO 4762 socket head cap screw, manufactured from class 8.8 steel with a black oxide finish. It is a versatile fastener for frames, machinery, 3D printers, CNC machines, automation and mechanical assemblies requiring a strong cylindrical head with an internal hex drive.
The cylindrical ..
0.00€
Ex Tax:0.00€
New
Stock: In Stock
Model: DIN-913-setscrew
DIN 913 / ISO 4026 A2 Stainless Steel Flat-Point Set Screw
Headless set screw with an internal hex socket and flat point, made from A2 stainless steel. It is used to secure pulleys, gears, couplings, shaft collars and other components to a shaft when the assembly has a compatible metric thread.
Av..
0.00€
Ex Tax:0.00€
New
Stock: In Stock
Model: din-933-Tornillo
DIN 933 / ISO 4017 Hex Head Screw in Black-Oxide Class 8.8 Steel
Metric hex head screw with a fully threaded shank and black oxide finish. It is a standard fastener for frames, profiles, brackets, 3D printers, CNC machines and other mechanical assemblies using a nut or tapped hole of the same threa..
0.00€
Ex Tax:0.00€