Stock: In Stock
Model: F623zz-bearing
The F623ZZ flanged ball bearing is designed for guiding and transmission applications where belts, pulleys or moving parts must remain accurately centered. Its integrated flange helps prevent lateral movement while simplifying installation in a wide variety of mechanisms.
Features
Flange..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: F624ZZ
The F624ZZ is a flanged ball bearing commonly used in 3D printers as an idler bearing on the X and Y axes. Its integrated flange helps guide belts or moving components without requiring additional printed pulleys, preventing lateral movement and reducing unwanted friction.
Features
Shiel..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: F625ZZ
The F625ZZ is a radial ball bearing with a 5 mm inner diameter, an integrated flange and metal shields on both sides. Its compact design makes it suitable for mechanisms used in 3D printers, CNC machines, extruders, guides, small wheels and other assemblies requiring a bearing with a lateral shoulde..
0.65€
Ex Tax:0.54€
Stock: In Stock
Model: F684ZZ
F684ZZ miniature flanged bearing with metal shields on both sides. Its main body has nominal dimensions of 4 × 9 × 4 mm, while the flange has a nominal diameter of 10.3 mm.
Nominal dimensions
Reference: F684ZZ.
Inner diameter: 4 mm.
Body outer diameter: 9 mm.
Overall width: 4 mm.
Flange di..
0.65€
Ex Tax:0.54€
Stock: In Stock
Model: F688ZZ
The F688ZZ is a flanged radial ball bearing with an 8 mm inner diameter and metal shields on both sides. Its integrated flange provides an axial shoulder against the edge of a housing and helps prevent the bearing from being inserted completely into it.
It can be used in 3D printers, CNC machines..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: F695ZZ
F695ZZ miniature flanged bearing with metal shields on both sides. It has a nominal 5 × 13 × 4 mm body and a 15 mm diameter flange for axial positioning.
Nominal dimensions
Reference: F695ZZ.
Inner diameter: 5 mm.
Body outer diameter: 13 mm.
Overall width: 4 mm.
Flange diameter: 15 mm.
Fl..
0.75€
Ex Tax:0.62€
Stock: In Stock
Model: F8-16M
The F8-16M is a single-direction thrust ball bearing designed to transfer forces parallel to a shaft between a rotating component and a fixed support. Its nominal 8 × 16 × 5 mm dimensions make it particularly useful in Z-axis drives with an 8 mm lead screw, installed underneath the coupling.
HTA3..
0.50€
Ex Tax:0.41€
Out of Stock
Stock: Out of Stock
Model: Terminal FDD2-187
FDD2-187 female quick-disconnect terminal for crimping onto wires with a cross-sectional area from 1.5 to 2.5mm². It mates with a male tab from the nominal .187 series, equivalent to approximately 4.75mm and commonly described as a 4.8mm quick-disconnect tab.
A separate transparent protective sle..
0.18€
Ex Tax:0.15€
-8 %
Out of Stock
Stock: Out of Stock
Model: Base-Lisa-Rugosa-33x33
Flexible steel sheet coated with PEI (Ultem 1000) with a smooth surface on one side and a rough surface on the other, designed to offer great fixation and adhesion on magnetic beds of 3D printers. The possibility of printing on both sides maximizes its usefulness and useful life.Characteristics:Grea..
42.00€ 38.50€
Ex Tax:31.82€
Stock: In Stock
Model: Termistor-104NT-4-GH
Fresa 3D 104NT-4 thermistor with a 100 mm cable and 2-pin GH1.25 connector. It is designed for temperature measurement systems compatible with the 104NT-4 electrical curve and this connection format.
Features
Type: 104NT-4 NTC thermistor.
Cable length: 100 mm.
Connector: 2-pin GH1.25.
Brand: ..
3.35€
Ex Tax:2.77€
Out of Stock
Stock: Out of Stock
Model: Termistor-104NT-4-XH
Fresa 3D 104NT-4 thermistor with a 145 mm cable and 2-pin XH2.54 connector. It is intended for temperature measurement in hotends and other systems compatible with the 104NT-4 electrical curve.
Features
Sensor type: 104NT-4 NTC thermistor.
Cable length: 145 mm.
Connector: 2-pin XH2.54.
Brand:..
3.35€
Ex Tax:2.77€
Stock: In Stock
Model: GT2-80Z-6mm
Fresa 3D GT2 80-tooth pulley for 6 mm belts, made of aluminium alloy and designed to mount on a 5 mm shaft with two grub screws.
Its large diameter is particularly useful as a driven pulley in belt reductions, rotary axes, CNC mechanisms, robotics and projects requiring increased mechanical resol..
3.18€
Ex Tax:2.63€