Recommended
-30 %
Out of Stock
Stock: Out of Stock
Model: Mega 2560 R3 (Compatible) 16u2
The Compatible Arduino Mega 2560 R3 with ATmega16U2 is a development board based on the ATmega2560 microcontroller, designed for projects requiring a large number of input and output connections. This version features the ATmega16U2 USB interface, the same USB chip used on the original Arduino Mega,..
24.99€ 17.45€
Ex Tax:14.42€
-29 %
Out of Stock
Stock: Out of Stock
Model: MegaCompatible
The Compatible Arduino Mega 2560 R3 is a development board based on the ATmega2560 microcontroller, designed for projects requiring a large number of input and output connections. It is widely used in robotics, automation, electronics and 3D printing thanks to its expandability and compatibility wit..
17.99€ 12.75€
Ex Tax:10.54€
Recommended
FLASH
-49 %
Stock: In Stock
Model: HotendV6-HQ
Compact V6 hotend for 1.75 mm filament, configured and assembled by HTA3D with your selected components. Choose the heatbreak, heater block, nozzle, heater cartridge, thermistor connector and PTFE length to suit the material, power system and printer installation.
This is not a fixed configuratio..
39.00€ 19.99€
Ex Tax:16.52€
Stock: In Stock
Model: Hotend-Vol
Configurable Volcano-type hotend for higher-flow 3D printing with 1.75 mm filament. Its extended heater block and Volcano nozzle provide a longer heated path than a conventional V6 hotend, helping to melt more material per second when the rest of the system can also deliver it.
Select heater volt..
19.95€
Ex Tax:16.49€
Stock: In Stock
Model: Muelle-01
Helical compression spring with a nominal 4mm inside diameter, available in several lengths. It may be used in adjustable 3D-printer mechanisms, extruders, heated beds and mechanical projects that require pressure between two components.
Its continuous format allows a suitable section to be selec..
0.17€
Ex Tax:0.14€
Stock: In Stock
Model: BFB0712HF
Delta BFB0712HF 12 V centrifugal blower, the model used by the original regular or 300 Nevermore StealthMax project. Its compact, approximately 65 × 65 mm format provides the static pressure required to move air through the carbon basket and HEPA filters.
This is not the official fan for the ..
3.99€
Ex Tax:3.30€
Stock: In Stock
Model: Medidor-tension
Digital comparative GT2 belt gauge with an elastic return mechanism. It combines an LCD displacement indicator, a bracket that rests on the belt and an elastic assembly that returns the measuring mechanism.
It allows measurements to be repeated under similar conditions and the adjustment of one o..
8.99€
Ex Tax:7.43€
Stock: In Stock
Model: Medidor-tension-boton
Digital comparative gauge for adjusting GT2 belts, consisting of an LCD displacement indicator and a bracket designed to rest on the belt. This version has a retractable-button mechanism that helps withdraw the probe and repeat the measurement.
The tool measures in millimetres or inches how far t..
7.99€
Ex Tax:6.60€
-32 %
Stock: In Stock
Model: Dimafix
DIMAFIX Adhesive Spray for 3D Printer Heated Beds — 400 ml
DIMAFIX is an adhesive spray for improving first-layer adhesion on FFF/FDM 3D printers with heated beds. It is especially useful when a print needs additional protection against lifting or warping during printing.
Adhesion activates when t..
18.99€ 12.85€
Ex Tax:10.62€
New
Stock: In Stock
Model: Dimafix-pen
DIMAFIX Pen Heated-Bed Adhesive for 3D Printing — 90 ml
Liquid DIMAFIX adhesive in an applicator-pen format for improving first-layer adhesion on FFF/FDM 3D printers with heated beds. The pen format allows precise, local application to the print area.
Its adhesive effect activates at approximately..
13.25€
Ex Tax:10.95€
Stock: In Stock
Model: DIN-125-1a-arandela
Standard zinc-plated steel flat washer designed to distribute the clamping load beneath a screw head or nut and reduce direct contact with the mounting surface.
Its geometry follows the dimensional references of DIN 125-1 form A and ISO 7089. It is a versatile choice for mechanical assemblies, st..
0.00€
Ex Tax:0.00€
Stock: In Stock
Model: DIN-127b-arandela
Split helical spring washer manufactured from steel, with geometry corresponding to the traditional DIN 127 form B reference.
Its shape produces an elastic reaction when compressed during tightening. It is mainly used as a replacement part in existing assemblies or in conventional mechanical appl..
0.00€
Ex Tax:0.00€