-73 %
Stock: In Stock
Model: P3Steel_HTA3D_HardwareSet
Hardware kit prepared for assembling and maintaining an HTA3D P3Steel 3D printer with a single-extruder configuration. It brings together the screws, nuts, washers and bed springs used in this version of the machine.
Suitable for building an HTA3D P3Steel, replacing worn hardware or keeping a mat..
20.00€ 5.35€
Ex Tax:4.42€
-71 %
Stock: In Stock
Model: P3Steel Dual HTA3D HardwareSet
Hardware kit prepared for an HTA3D P3Steel Dual 3D printer. It includes the additional fasteners used by this dual-extrusion build and combines its screws, nuts, washers and springs in one organised set.
The Dual version uses different quantities and a different combination of fasteners from the ..
20.00€ 5.75€
Ex Tax:4.75€
Stock: In Stock
Model: Termorretractil
Heat shrink tubing is a flexible sleeve designed to insulate, protect and identify electrical connections. When heated, the tubing shrinks around the cable or component, providing a clean finish and additional protection against wear and abrasion.
Features
Excellent electrical insulation..
0.12€
Ex Tax:0.10€
Stock: In Stock
Model: CamaCaliente-sujecion
Hardware kit for mounting and levelling a 3D-printer heated bed with four countersunk holes. It includes M3 screws, compression springs, wide washers and self-locking nuts to create four adjustable mounting points.
The springs allow the distance between the heated bed and Y carriage to be adjuste..
1.50€
Ex Tax:1.24€
New
Stock: In Stock
Model: Base-Mec-330
330 × 330 × 8 mm machined cast aluminium plate, designed by HTA3D as a robust foundation for a 3D-printer bed. Its thickness adds rigidity and thermal mass, while the machined countersinks and auxiliary threads allow clean integration into a compatible structure.
This size is used by the assemble..
61.99€
Ex Tax:51.23€
New
Stock: In Stock
Model: Base-Mec-400
400 × 400 × 8 mm machined cast aluminium plate, designed by HTA3D for large-format 3D-printer beds. Its 8 mm thickness provides a robust structure and substantial thermal mass on which to install the heater and print surface required by the project.
This is not a complete heated bed: the supplied..
88.99€
Ex Tax:73.55€
New
Stock: In Stock
Model: Base-Mec-500
500 × 500 × 8 mm machined cast aluminium plate, designed by HTA3D for large-format 3D-printer beds. Its thick construction provides a robust platform with substantial thermal inertia on which to integrate a heater and print surface selected for the machine.
Only the machined plate is supplied. It..
119.99€
Ex Tax:99.17€
-30 %
Stock: In Stock
Model: HTA3D-Extrusor
A direct extruder designed by HTA3D for the HTA3D P3Steel and projects based on the classic Prusa i3 architecture. It combines an MK8 drive for 1.75 mm filament, a close-fitting filament guide and an all-metal V6 hotend. It is a simple, proven solution for maintaining a P3Steel or upgrading an older..
55.99€ 38.99€
Ex Tax:32.22€
-23 %
Stock: In Stock
Model: HTA3D-DUAL-EXTRUDER
The HTA3D dual Bowden extruder for P3Steel combines two independent MK8 drive systems with a two-nozzle Chimera-style hotend to add dual extrusion to a compatible P3Steel. It can print in two colours, combine a model material with a support material, or dedicate each tool to a different filament, pr..
95.00€ 73.50€
Ex Tax:60.74€
Stock: In Stock
Model: HTA3D-V2-Hardware-Set
Hardware set prepared for assembling and servicing the HTA3D V2 extruder. It brings together the M3 and M4 screws, nuts, washers and spring-loaded assembly used throughout the extruder.
It is a convenient way to assemble the printed extruder parts or replace their hardware without sourcing every ..
2.50€
Ex Tax:2.07€
Stock: In Stock
Model: Igus DryLin® RJ4JP 01-08
Igus DryLin RJ4JP-01-08 solid-polymer linear plain bearing made from iglidur J4 for 8 mm shafts. It retains the nominal envelope of an LM8UU —15 mm outside diameter and 24 mm long— while replacing recirculating balls with quiet, dry-running motion that requires no external lubrication.
It is part..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Igus DryLin® RJ4JP 01-10
Igus DryLin RJ4JP-01-10 solid-polymer linear plain bearing made from iglidur J4 for 10 mm shafts. It retains the nominal envelope of an LM10UU —19 mm outside diameter and 29 mm long— while replacing recirculating balls with quiet, dry-running motion that requires no external lubrication.
It is pa..
1.19€
Ex Tax:0.98€