GDSTIME 3010 24V Axial Fan with 1 Metre Cable

GDSTIME 3010 24V axial fan with a 1 metre power cable. Its compact 30 × 30 × 10 mm format is suitable for cooling hotends, small heatsinks, electronics and other components where space is limited.

The long cable simplifies installation in 3D printers and machines where the controller board is located away from the print head or cooling point.

Key features

• Brand: GDSTIME.
• Type: brushless axial fan.
• Nominal format: 3010.
• Dimensions: 30 × 30 × 10 mm.
• Rated voltage: 24V DC.
• Rated current: 0.08A ±10%.
• Rated speed: 7000 RPM ±10%.
• Rated airflow: 3.45 CFM.
• Rated noise level: 24 dBA ±10%.
• Two-wire connection.
• Approximate cable length: 1 m.
• Approximate weight: 12.5 g.

Applications

• Hotend heatsink cooling.
• Cooling electronics and drivers.
• Small compartments and enclosures.
• 3D printers, robotics and automation.

Compatibility

It can be installed in equipment designed for 3010 24V axial fans when the dimensions, mounting-hole pattern, connector, polarity and airflow direction all match.

Sharing the 3010 format does not guarantee that every fan is a direct replacement. Available thickness, cable position and bracket geometry must be checked.

For 12V systems, see the 3010 12V axial fan with a 1 metre cable. For demanding applications or extended operation, consider the GDSTIME 3010 24V ball bearing fan.

Installation and speed control

Confirm that the output supplies 24V and has the correct polarity. Do not connect the fan directly to a 12V supply expecting the same performance or to a voltage above its rating.

When using PWM control, verify reliable startup at the configured minimum setting. When cooling the cold side of a hotend, prioritise continuous and reliable operation to help prevent heat from travelling towards the filament.

Package contents

• 1 × GDSTIME 3010 24V axial fan with 1 m cable.