3010 12V Axial Fan with 1 Metre Cable

3010 12V axial fan with a 1 metre power cable. Its nominal 30 × 30 × 10 mm dimensions make it suitable for hotends, small heatsinks, electronics and other mechanisms with limited space.

The long cable simplifies connection where the controller is located away from the cooling point and allows the wiring route to be adapted to machines of different sizes.

Key features

• Type: brushless axial fan.
• Nominal format: 3010.
• Dimensions: 30 × 30 × 10 mm.
• Rated voltage: 12V DC.
• Rated current: 0.08A ±10%.
• Rated speed: 7000 RPM ±10%.
• Rated airflow: 3.45 CFM.
• Rated noise level: 24 dBA ±10%.
• Two-wire connection.
• Approximate cable length: 1 m.
• Approximate weight: 12.5 g.

Applications

• Hotend heatsink cooling.
• Cooling electronic boards and drivers.
• Small compartments and enclosures.
• Robotics and automation projects.

Compatibility

It can replace another 3010 12V axial fan when the dimensions, mounting-hole pattern, available space, connector and polarity all match.

In 3D printers it can be used as a heatsink fan where the bracket is designed for a 3010 axial fan. Compatibility with a duct designed for a blower must not be assumed, as the two fan types have different shapes and outlet directions.

For 24V machines, see the 3010 24V axial fan with a 1 metre cable. For a construction better suited to extended operation, consider the GDSTIME 3010 12V dual ball bearing fan.

Installation and speed control

Check the 12V supply and polarity before connection. Power the fan from a suitable controller output or MOSFET stage.

When using PWM control, configure a minimum value that allows the rotor to start consistently. Reliable continuous airflow is normally important when cooling a hotend heatsink.

Package contents

• 1 × 3010 12V axial fan with 1 m cable.