L3K Extruder

-10% L3K Extruder

L3k Improved new Greg's Wade Extruder 

Based on:  


New extruder design that improves the filament inclusion in the body of the extruder, as it brings closer to the filament to the Hobbed Bolt. 


The union of the extruder and the hotend is performed with a printed piece acting as a "flange" and it is screwed to the body, ensuring a strong and comfortable gripping assembly. It is designed for all metal Hotends.




Printed parts:

-1x Extruder.
-1x Hotend flange.
-1x Idler.



 -1x big gear.
 -1x small gear.

-X axis Carriage (optionally):

Bearings, nuts and bolts:

-3x 608zz
-1x Hobeed Bolt + 3x washers M8 + 1x selfblocking nut M8.
-1x M8x20 setscrew 

-2x M3x40 + 4x M3 washers + 2x M3 nuts + 2x springs for ilde
-3x Mx25 + 3x M3 nuts
-1x M3x5 setscrew and M3 nut

*If you choose the option with X-carriage, we will send also:
-4x nuts M4.
-4x M4x25

You can choose the colour, otherwise, we will ship them in any available colour.

Write a review

Note: HTML is not translated!
    Bad           Good


All our kits are printed with high quality materials, producing very strong and durable parts.

  • Dimensional:

The gears are completely round and the teeth fit deeply.

  • ​Infill:

​All pieces have an approximately infill of 40% plus a minimum perimeter of 1 mm (lower, upper and sides).

  • Superficial:

All parts are inspected after being printed in order to look for flaws. They have, as it is natural, the characteristics of the 3D printing process.


Custom products

This product is prepared according to the customer requirements, thus, the handling time is between 24 and 48 hours approximately.

  • Views: 7063
  • Product Code: L3K-Extrusor
  • Availability: In Stock
  • 15.00€
  • 13.49€
  • Ex Tax: 11.15€

Available Options

Tags: Assembled Extruders, Extruder,