- Stock: 425
- Model: Nut-T8x2-Copper
Model:
Copper T8x8
Copper T8x2
Spring Copper T8x8
Spring Copper T8x2
POM T8x8
POM T8x2
T8×2 trapezoidal flange nut manufactured from a brass-type alloy, designed to convert the rotation of an 8 mm lead screw into linear motion. Its 2 mm lead provides fine travel for Z axes, actuators and small CNC machines.
Specifications
- Thread type: T8×2.
- Nominal diameter: 8 mm.
- Lead: 2 mm per revolution.
- Nominal pitch: 2 mm.
- Common single-start configuration.
- Brass-type construction.
- Circular flange with four mounting holes.
Nominal dimensions
- Flange outer diameter: 22 mm.
- Body outer diameter: approximately 10.2 mm.
- Body length from flange: 10 mm.
- Flange thickness: 3.5 mm.
- Mounting holes: 4 × Ø3.5 mm.
- Mounting pitch circle: Ø16 mm.
These dimensions come from the reference drawing in the product gallery. Check the supplied part before machining a close-tolerance bracket.
Compatibility
Compatible with the T8×2 8 mm trapezoidal lead screw. It may also be replaced by the T8×2 anti-backlash nut or the T8×2 POM nut when the mounting and application allow it.
It is not compatible with T8×8 lead screws. Always check the complete thread designation rather than diameter alone.
Firmware configuration
- 200-step motor at 1/16 microstepping: 1600 steps/mm.
- 200-step motor at 1/32 microstepping: 3200 steps/mm.
- Klipper: rotation_distance: 2 as a mechanical starting value.
Values must be adapted to the installed motor and driver and checked by measuring actual movement.
Package contents
- 1 T8×2 trapezoidal flange nut.
