- Stock: 512
- Model: Nut-POM-T8x2
Model:
Copper T8x8
Copper T8x2
Spring Copper T8x8
Spring Copper T8x2
POM T8x8
POM T8x2
T8×2 trapezoidal POM nut for linear motion systems using an 8 mm lead screw. Its 2 mm travel per revolution and the material's low friction make it suitable for Z axes, actuators and mechanisms requiring fine movement.
Features
- T8×2 trapezoidal thread.
- Nominal diameter: 8 mm.
- Lead: 2 mm per revolution.
- Nominal pitch: 2 mm.
- Common single-start configuration.
- Material: POM.
- Circular flange with four mounting holes.
Nominal dimensions
- Flange outer diameter: 22 mm.
- Body outer diameter: approximately 10.2 mm.
- Body length from flange: 10 mm.
- Flange thickness: 3.5 mm.
- Mounting holes: 4 × Ø3.5 mm.
- Mounting pitch circle: Ø16 mm.
These dimensions should be treated as nominal. Check the supplied part before manufacturing a close-tolerance housing.
Compatibility
Compatible with the T8×2 8 mm trapezoidal lead screw. It is not compatible with T8×8 lead screws.
It may be used as an alternative to the T8×2 brass nut or the T8×2 anti-backlash nut when the mounting and operating requirements match.
POM may offer lower friction and noise than a metal nut, but suitability depends on load, temperature, speed, lubrication and maintenance. It should not automatically be considered an upgrade.
Configuration
- 200-step motor at 1/16 microstepping: 1600 steps/mm.
- 200-step motor at 1/32 microstepping: 3200 steps/mm.
- Klipper: rotation_distance: 2 as a starting value.
Package contents
- 1 T8×2 POM trapezoidal flange nut.
