Stock: In Stock
Model: LED-lamp
Ultra-thin, circular and dimmable USB LED lamp with three selectable light tones: warm, neutral and cool. Its compact format and in-line controller make it suitable for illuminating lamps, shades and decorative objects printed in translucent filament, as well as providing auxiliary light for a 3D pr..
5.99€
Ex Tax:4.95€
Stock: In Stock
Model: Extensor-USB-2.0
USB 2.0 extension cable approximately 30cm long, with a USB Type-A male connector at one end and a panel-mount USB Type-A female socket at the other.
It moves an internal USB port to the outside of an enclosure, cover or control panel, providing access without opening the electronics compartment...
1.40€
Ex Tax:1.16€
Stock: In Stock
Model: Espaciador-Excentrica-V
Eccentric spacer for adjusting wheel preload in V-Slot motion systems. Its off-centre bore slightly changes the axle position when the hexagonal body is rotated, moving the wheel closer to or farther away from the profile.
This adjustment helps remove carriage play without repositioning the wheel..
0.25€
Ex Tax:0.21€
-44 %
Stock: In Stock
Model: Hotend-V6-1.75mm
The V6 All Metal Hotend is designed for FDM 3D printers using 1.75 mm filament. Its all-metal construction eliminates the need for PTFE components inside the hot zone, allowing compatibility with a wide range of printing materials while providing excellent durability and easy maintenance.
Feature..
30.00€ 16.95€
Ex Tax:14.01€
Stock: In Stock
Model: V6-Titanium-throat
All-metal titanium heatbreak for building or repairing V6-style hotends. It has an M7 × 1 thread for the heatsink, an M6 × 1 thread for the heater block and a 2mm bore for 1.75mm filament.As PTFE does not extend into the hot zone, it is suitable for all-metal assemblies. Titanium limits heat transfe..
5.56€
Ex Tax:4.60€
Stock: In Stock
Model: V6-Heatsink-Remote
This V6 heatsink is designed for Bowden extrusion systems compatible with V6 hotends. Its internal bore allows the PTFE tube to extend down to the heatbreak, reducing unsupported filament length and promoting more stable filament feeding.
Features
Compatible with V6 hotends.
Designe..
1.35€
Ex Tax:1.12€
Stock: In Stock
Model: Nozzle-coated-0.3
V6-style brass nozzle for 1.75 mm filament, with a nominal 0.3 mm outlet and an external non-stick coating. Its smaller outlet is intended for small parts, lettering, fine contours and details that a 0.4 mm nozzle cannot reproduce as easily.
The dark finish covers the outer cone and hex to help r..
2.29€
Ex Tax:1.89€
Stock: In Stock
Model: Nozzle-coated-0.4
V6-style brass nozzle for 1.75 mm filament, with a nominal 0.4 mm outlet and an external non-stick coating. It is a general-purpose size balancing detail, line strength, ease of tuning and print time.
The dark finish covers the outer cone and hex to help reduce plastic buildup and simplify cleani..
2.29€
Ex Tax:1.89€
Stock: In Stock
Model: V6-Heater-Block-PT100
V6-format heater block designed to accommodate temperature sensors with a nominal 3 mm cylindrical encapsulation, including NTC thermistors and RTD sensors such as the PT100. It also firmly secures the heater cartridge, providing stable installation and good thermal contact between the hotend compon..
0.90€
Ex Tax:0.74€
Stock: In Stock
Model: V6-Heater-Block
V6-format heater block designed to secure the heater cartridge and thermistor using independent clamping systems. This configuration provides stable installation of the components responsible for heating and monitoring the hotend temperature.
Features
Format: V6.
Nozzle thread: M6.
Thermisto..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: V6-Heatsink-with-all-metal-throat
This V6 heatsink features an integrated all-metal heatbreak and is designed for Bowden extrusion systems compatible with V5 and V6 hotends. Its compact design provides efficient heat dissipation while allowing the installation of a Bowden fitting for PTFE tubing.
Features
V6 heatsink wit..
2.90€
Ex Tax:2.40€
Stock: In Stock
Model: V6-Heatsink-with-4.2-throat
This V6 heatsink features an integrated PTFE-lined heatbreak, allowing the PTFE tube to extend down to the top of the nozzle. Designed for Bowden extrusion systems compatible with V5 and V6 hotends, it minimizes unsupported filament length for smoother and more reliable extrusion.
Features
..
2.90€
Ex Tax:2.40€