Stock: In Stock
Model: Nozzle-1.75 hardened steel-0.5
A 0.5 mm Trianglelab V6 nozzle made from hardened A2 tool steel with a declared hardness of HRC 62. It provides wear resistance for 1.75 mm carbon-fibre, glow-in-the-dark, wood-filled, metal-filled and other abrasive filaments.
The 0.5 mm outlet is a useful middle ground: it retains more detail t..
7.00€
Ex Tax:5.79€
Stock: In Stock
Model: Nozzle-1.75 hardened steel-0.6
A 0.6 mm Trianglelab V6 nozzle made from hardened A2 tool steel with a declared hardness of HRC 62. Its combination of wear resistance and a larger outlet is particularly useful for 1.75 mm carbon-fibre, glow-in-the-dark, wood-filled, metal-filled and other abrasive filaments.
Compared with 0.4 a..
6.90€
Ex Tax:5.70€
Recommended
Stock: In Stock
Model: Throat-AM-Bimetal-M6-M7
Trianglelab all-metal bimetal heatbreak for V6-style hotends, with an M6 thread for the heater block and an M7 thread for the heatsink. Its nominal length is 22mm and it is designed for 1.75mm filament.
Its three-piece construction combines a polished stainless-steel centre tube with copper-alloy..
15.75€
Ex Tax:13.02€
Stock: In Stock
Model: V6DM-Heatsink
Compact Trianglelab V6DM aluminium heatsink for building a hotend with an M7 × 1 upper-thread heatbreak. Its cylindrical body measures approximately 22mm in diameter and 26mm high, allowing lightweight toolheads to be built around a direct four-screw M2.5 top mounting system.
Unlike a conventiona..
8.50€
Ex Tax:7.02€
Stock: In Stock
Model: Nozzle-ZS-0.4-SF
The Trianglelab ZS V6 0.4mm combines a copper-alloy body with a nickel-plated hardened-steel tip or insert. This construction is intended to retain good heat spreading through the body while adding wear resistance where filament leaves the nozzle.
It is made for 1.75mm filament and abrasive materia..
16.75€
Ex Tax:13.84€
Out of Stock
Stock: Out of Stock
Model: Nozzle-ZS-0.6-SF
The Trianglelab ZS V6 0.6mm combines a copper-alloy body with a nickel-plated hardened-steel tip or insert. The body helps spread heat while the outlet area resists wear from carbon fibre, glass fibre, glow and other abrasive fills.
Its 0.6mm outlet provides a wider path than the 0.4mm version. Thi..
16.75€
Ex Tax:13.84€
Stock: In Stock
Model: Extender-Melt-zone
Trianglelab ZS-MZE melt zone extender for hotends with a compatible V6 nozzle interface. It fits between the heater block and nozzle, extending the heated filament path by approximately 8.4 mm to increase the hotend's potential melting capacity.
It is CNC-machined from a nickel-plated copper allo..
6.99€
Ex Tax:5.78€
Stock: In Stock
Model: Aislante-Térmico-PET
Flexible thermal insulation designed for installation underneath a 3D printer heated bed. Its three-layer construction helps reduce downward heat loss, contributing to more efficient heating and improved temperature stability.
This is a passive component: it requires no electrical power and may b..
1.19€
Ex Tax:0.98€
Stock: In Stock
Model: Cable bipolar-conector
Two-wire cable for powering or extending fans used in 3D printers, CNC machines, electronics enclosures and other projects.
It has a 2-pin XH2.54 connector at one end and two separate crimped contacts at the other. Several lengths are available to suit the cable routing required by each machine.
..
1.45€
Ex Tax:1.20€
Stock: In Stock
Model: Metal-Hotend-TZ-X-P
TZ 2.0 all-metal hotend for Bambu Lab X1, X1C, P1P and P1S, designed as an alternative to the original integrated hotend body. Its main service advantage is a threaded replaceable nozzle: if the nozzle becomes worn or damaged, it can be changed without replacing the complete hotend body.
The asse..
14.90€
Ex Tax:12.31€
Out of Stock
Stock: Out of Stock
Model: TZ-V6-2.0
Compact TZ-V6 2.0 hotend for 1.75 mm filament, designed for 24 V systems with a 48 W ceramic heater and a Semitec 104NT-4 thermistor. The assembly combines a lightweight heatsink, titanium heatbreak, nickel-plated chromium-zirconium copper block and a hardened-steel TZ-V6 nozzle with a 0.4 mm outlet..
14.25€
Ex Tax:11.78€
Only a few units in stock
-58 %
Stock: In Stock
Model: U604ZZ U-Groove Bearing
The U604ZZ U-Groove bearing is designed for applications requiring the guidance of belts, cables, rods or other cylindrical elements. Its U-shaped groove and double metal shields (ZZ) provide smooth operation while helping protect the bearing from dust and debris.
Features
U-Groove beari..
1.50€ 0.63€
Ex Tax:0.52€