Out of Stock
Stock: Out of Stock
Model: Smart Filament Sensor Break Detection Module
The BIGTREETECH Smart Filament Sensor SFS V1.0 monitors the actual movement of 1.75 mm filament through an internal encoder. Unlike a basic mechanical sensor that only checks whether filament is present, this unit can help stop a print when the filament no longer moves because the spool is empty, th..
24.50€
Ex Tax:20.25€
Out of Stock
Stock: Out of Stock
Model: SKR 2
The BIGTREETECH SKR 2 is a 32-bit controller board for DIY 3D printers, upgrades and rebuilds that require five removable driver channels, two hotend outputs, a heated bed and a broad range of displays, probes and sensors. Each socket can be configured for STEP/DIR, UART or SPI drivers, allowing the..
70.99€
Ex Tax:58.67€
-10 %
Out of Stock
Stock: Out of Stock
Model: SKR-Pico
The BIGTREETECH SKR Pico is a compact 85 × 56 mm controller for Voron V0 printers and other projects requiring four independently controlled motors. It integrates an RP2040 microcontroller and four UART-controlled TMC2209 drivers and connects to a computer running Klipper over USB-C or a suitably co..
27.75€ 24.85€
Ex Tax:20.54€
Out of Stock
Stock: Out of Stock
Model: TFT43-V3.0
The BIGTREETECH TFT43 V3.0 combines a 4.3-inch touchscreen with graphical 12864 LCD emulation. Use the touch menu through a serial link to the mainboard, or use the printer firmware's own menu through the EXP connectors. It suits Marlin builds that need a larger display while retaining encoder-based..
73.99€
Ex Tax:61.15€
Out of Stock
Stock: Out of Stock
Model: TFT50-BTT
The BIGTREETECH TFT50 V3.0 combines a large 5-inch colour touchscreen with the ability to operate as a graphical 12864 LCD controlled by the printer firmware. Use its own touch interface through a serial UART connection, or connect EXP1 and EXP2 to access Marlin's classic encoder-driven menu.
Bot..
75.99€
Ex Tax:62.80€
Out of Stock
Stock: Out of Stock
Model: ViVid
BIGTREETECH ViViD brings four 1.75 mm filament spools into a feeding system for Klipper 3D printers. It selects each channel through a buffer, enabling multicolour or multimaterial jobs with a single toolhead, while its heated chamber helps dry and protect filament. Colours are printed in sequence, ..
342.50€
Ex Tax:283.06€
Out of Stock
Stock: Out of Stock
Model: 30A mosfet-module
The BIQU116-A2 is an external MOSFET module used to switch a 12 or 24V DC heated bed or another resistive load from a controller board's heater output. The electronics retain temperature regulation while the module switches current supplied directly by the power supply.
Its large heatsink, separa..
13.95€
Ex Tax:11.53€
Out of Stock
Stock: Out of Stock
Model: FC óptico Compacto
Compact optical endstop for 3D printers, CNC machines and automation projects. It detects a flag entering its slot by interrupting an infrared beam, with no mechanical contact between the moving part and the sensor.
Its approximately 35 × 11 mm board is suitable for confined spaces and includes a..
1.75€
Ex Tax:1.45€
Out of Stock
Stock: Out of Stock
Model: Terminal FDD2-187
FDD2-187 female quick-disconnect terminal for crimping onto wires with a cross-sectional area from 1.5 to 2.5mm². It mates with a male tab from the nominal .187 series, equivalent to approximately 4.75mm and commonly described as a 4.8mm quick-disconnect tab.
A separate transparent protective sle..
0.18€
Ex Tax:0.15€
Out of Stock
Stock: Out of Stock
Model: Termistor-104NT-4-XH
Fresa 3D 104NT-4 thermistor with a 145 mm cable and 2-pin XH2.54 connector. It is intended for temperature measurement in hotends and other systems compatible with the 104NT-4 electrical curve.
Features
Sensor type: 104NT-4 NTC thermistor.
Cable length: 145 mm.
Connector: 2-pin XH2.54.
Brand:..
3.35€
Ex Tax:2.77€
Out of Stock
Stock: Out of Stock
Model: 3DTouch-Fysetc
The Fysetc 3DTouch is a contact probe with a retractable pin, designed to measure the build surface so that the firmware can compensate for height variations during the first layer. Its operating principle is compatible with BLTouch-type probes, although this is a Fysetc product and not a genuine AN..
14.99€
Ex Tax:12.39€
Only a few units in stock
-17 %
Stock: In Stock
Model: Lámina Fysetc MK52
The FYSETC flexible sheet for MK52 magnetic beds is made from spring steel and coated with powder-coated textured PEI on both sides. Its rough surface promotes first-layer adhesion and leaves an even textured finish on the bottom of the printed part.
After printing, the sheet can be removed from ..
34.99€ 28.95€
Ex Tax:23.93€