Out of Stock
Stock: Out of Stock
Model: Teflón-4-2-trans
Translucent PTFE tube with a 2 mm inside diameter and 4 mm outside diameter for guiding 1.75 mm filament. This is a common size for Bowden systems and other feed paths using fittings designed for 4 mm tubing. PTFE's low-friction surface helps filament move smoothly when the route and connections are..
1.70€
Ex Tax:1.41€
Stock: In Stock
Model: Termistor 104GT-2
High-precision Trianglelab thermistor cartridge built around a Semitec 104NT-4-R025H42G sensor, also identified as 104GT-2. It includes mechanical protection, high-temperature wiring and a 1 metre extension for installation in a compatible hotend.
Features
100K Semitec 104NT-4-R025H42G sensor wi..
3.89€
Ex Tax:3.21€
Stock: In Stock
Model: Resistencia-ceramica-ACE
Original Trianglelab 24 V, 105 W nominal ceramic heating element, designed as a replacement for the Dragon ACE hotend. Its flat format transfers heat directly to the heater block and allows replacement without completely disassembling the hotend.
The version currently supplied corresponds to Tria..
10.25€
Ex Tax:8.47€
Out of Stock
Stock: Out of Stock
Model: SensorTemp-PT1000
Trianglelab PT1000 RTD temperature sensor for 3D printers and high-temperature hotends. Its 3 mm cylindrical capsule fits compatible heater blocks, while its higher nominal resistance allows direct reading by certain controller boards without necessarily requiring an amplifier.
Features
Sensor t..
11.45€
Ex Tax:9.46€
Stock: In Stock
Model: PT100-4wire
Trianglelab four-wire PT100 RTD sensor for accurate temperature measurement in compatible hotends and thermal systems. Its four-conductor connection allows cable resistance to be compensated when used with an interface supporting this measurement method.
Features
Sensor type: PT100 RTD.
Detacha..
13.99€
Ex Tax:11.56€
Stock: In Stock
Model: CHC-b3950-24V
Trianglelab 24 V CHC ceramic heater core with an integrated NTC 100K B3950 thermistor. It replaces the separate block, heater cartridge and sensor with a compact assembly that heats in a ring around the melt zone. It is particularly useful for compatible V6 assemblies and conversions where low volum..
19.50€
Ex Tax:16.12€
Stock: In Stock
Model: CHC-PRO-b3950-24V
Trianglelab 24 V CHC Pro ceramic heater core with an integrated NTC 100K B3950 thermistor and a declared maximum power of 115 W. Its extended body creates a Volcano-type melt zone and surrounds the filament path with ring-shaped ceramic heating, an architecture intended for applications that require..
25.50€
Ex Tax:21.07€
Stock: In Stock
Model: CHC-XL
The Trianglelab CHC XL is a compact high-flow hotend for fast 3D printers and demanding melt-zone applications. It combines a 24 V, 128 W MCH ceramic heater, an integrated PT1000 sensor and an assembly weighing approximately 48 g.Its monolithic construction and multiple thermal-break design improve ..
82.99€
Ex Tax:68.59€
Stock: In Stock
Model: CHC-XL-wr
The Trianglelab CHC XL WR retains the CHC XL's 24 V / 128 W MCH heater, integrated PT1000 and high-flow architecture while adding a ceramic-coated wear-resistant transition zone. Trianglelab states up to five times longer life in this area with abrasive filament.The WR feature protects the hotend tr..
94.99€
Ex Tax:78.50€
Stock: In Stock
Model: CHCB-OT-Hotend
The Trianglelab CHCB-OT, developed with Omranello, is a modular high-performance hotend for selected Creality printers. This product is the 24 V version with a 100K B3950 NTC thermistor and a 0.4 mm Brass ZS MK8 Standard nozzle.Its ceramic heater surrounds the melt zone while the hot core and stainl..
39.99€
Ex Tax:33.05€
Stock: In Stock
Model: Nozzle-Comp-V6 1.75-0.1
Trianglelab brass nozzle for 1.75 mm filament, with a nominal 0.1 mm outlet and an M6 × 1 V6 interface. This CNC-machined standard V6 version combines the good thermal transfer of brass with manufacturing intended to keep the inner path consistent.
This is an extreme diameter for experimental, ve..
3.85€
Ex Tax:3.18€
Stock: In Stock
Model: Nozzle-Comp-V6 1.75-0.25
Trianglelab brass nozzle for 1.75 mm filament, with a nominal 0.25 mm outlet and an M6 × 1 V6 interface. This CNC-machined standard V6 version combines the good thermal transfer of brass with manufacturing intended to keep the inner path consistent.
It is intended for miniatures, small text and v..
3.25€
Ex Tax:2.69€