Out of Stock
Stock: Out of Stock
Model: CadenaPortacables10x10
Nylon cable drag chain for organising, guiding and protecting wiring on moving axes in 3D printers, CNC machines and automated equipment. It has a nominal internal cross-section of 10 × 10mm and an approximate length of 1 metre.
This version offers more capacity than the 7 × 7mm size while retain..
6.65€
Ex Tax:5.50€
Out of Stock
Stock: Out of Stock
Model: LCD-Cable-50cm
A 50 cm flat ribbon cable with ten conductors and 2 × 5 female IDC connectors, intended to connect RepRap LCD displays to controller boards or adapters that use matching EXP1 or EXP2 ports.
The flexible 28 AWG AWM 2651 ribbon keeps display wiring organised. Its red stripe identifies conductor 1 a..
0.99€
Ex Tax:0.82€
Out of Stock
Stock: Out of Stock
Model: PSU-24v10A
AC/DC switching power supply with a 24 V output and a maximum nominal current of 10 A, equivalent to 240 W. It is intended for 3D printers, small CNC machines, automation systems, lighting and other equipment operating entirely from 24 V.
Electrical specifications
Output voltage: 24 V DC.
Max..
14.99€
Ex Tax:12.39€
Out of Stock
Stock: Out of Stock
Model: PSU-24v15A
24 V, 15 A and 360 W switching power supply for 3D printers, CNC machines and electrical systems requiring more capacity than a 240 W unit. Its metal enclosure includes forced-air cooling and multiple output terminals for power distribution.
Electrical specifications
Output voltage: 24 V DC.
..
23.25€
Ex Tax:19.21€
Out of Stock
Stock: Out of Stock
Model: PSU-24v21A500W
AC/DC switching power supply with a 24 V output, maximum nominal current of 20 A and rated power of 480 W. It is intended for 3D printers, CNC equipment, automation and other high-consumption 24 V systems with several heaters and motors operating simultaneously.
Electrical specifications
Outpu..
24.99€
Ex Tax:20.65€
Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 70W
24 V, 70 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. This high-power variant is intended for systems that can both use and safely handle it: before replacing a 40 or 60 W heater, check the controller output, power supply, terminals, wiring, sensor, block and thermal configura..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 80W
24 V, 80 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. Its high power may shorten heat-up time and improve thermal recovery, but the hotend and entire electrical path must be verified as suitable before it can be used safely.
Technical specifications
..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: IR-Module
The Mini IR module is a non-contact optical probe designed to measure the position of a 3D printer build surface. Its compact 24 × 18mm circuit board makes it suitable for toolheads with limited space, including custom Cartesian, CoreXY and delta machines.
This revision uses a differential optica..
20.99€
Ex Tax:17.35€
Out of Stock
Stock: Out of Stock
Model: Cable-3DTouch-2m
Two-metre cable for connecting a 3DTouch automatic bed-levelling sensor to a 3D printer controller board. It is useful for larger machines or for routing the probe wiring neatly through the toolhead, drag chain and frame to the electronics enclosure.
The sensor end has a white 5-position connecto..
3.15€
Ex Tax:2.60€
-8 %
Out of Stock
Stock: Out of Stock
Model: Base-Lisa-Rugosa-33x33
This 330 × 330 mm print-bed kit includes a flexible steel sheet with smooth PEI on one side and textured PEI on the other, plus the adhesive magnetic base required to hold it on the platform. You can choose the finish left on the underside of the print and remove models more easily after the bed has..
42.00€ 38.50€
Ex Tax:31.82€
Out of Stock
Stock: Out of Stock
Model: CableMotor-XH2.54-0.5m
Description
Short four-conductor cable for connecting a stepper motor to a controller board or driver. It has a 2.0 mm pitch PH-type connector for the motor and a four-position XH-type connector for the electronics.
The 0.5 metre length is suitable when the motor is located close to the controller..
0.69€
Ex Tax:0.57€
Out of Stock
Stock: Out of Stock
Model: CableMotor-XH2.54-2m
Description
Two-metre four-conductor cable for connecting a stepper motor to a controller board or driver. It has a 2.0 mm pitch PH-type connector on the motor end and a four-position XH-type connector on the electronics end.
Its length makes it suitable for large-format 3D printers, CNC machines,..
0.99€
Ex Tax:0.82€