Stock: In Stock
Model: 4x-clip
This set of four reversible metal clamps is designed to securely hold print surfaces such as glass or build plates onto a heated bed. Their compact design minimizes interference with the print area while allowing quick installation and removal whenever needed.
Features
Set of 4 reversibl..
0.99€
Ex Tax:0.82€
-32 %
Stock: In Stock
Model: Dimafix
DIMAFIX Adhesive Spray for 3D Printer Heated Beds — 400 ml
DIMAFIX is an adhesive spray for improving first-layer adhesion on FFF/FDM 3D printers with heated beds. It is especially useful when a print needs additional protection against lifting or warping during printing.
Adhesion activates when t..
18.99€ 12.85€
Ex Tax:10.62€
Stock: In Stock
Model: Dimafix-pen
DIMAFIX Pen Heated-Bed Adhesive for 3D Printing — 90 ml
Liquid DIMAFIX adhesive in an applicator-pen format for improving first-layer adhesion on FFF/FDM 3D printers with heated beds. The pen format allows precise, local application to the print area.
Its adhesive effect activates at approximately..
13.25€
Ex Tax:10.95€
Stock: In Stock
Model: Energetic-base-22x22
Lámina flexible de acero con PEI por ambas caras de 300 × 300 mm
Lámina flexible de acero para cama magnética, con recubrimiento PEI/Ultem en ambas caras. Permite imprimir sobre una superficie de buena adherencia y retirar las piezas flexionando la lámina después de enfriar la cama.
Medida nominal..
33.00€
Ex Tax:27.27€
-20 %
Stock: In Stock
Model: Lámina Fysetc 220x220
The FYSETC 220 × 220mm flexible sheet combines two printing surfaces on a single spring-steel plate: a smooth gold face and a black textured PEI face. This lets you choose the bottom finish and adapt the surface to the filament without replacing the whole bed system.
It attaches to a compatible m..
32.00€ 25.75€
Ex Tax:21.28€
Stock: In Stock
Model: Base Adhesiva Antiwarping
Matte-Style Anti-Warping Adhesive Sheet for 3D Printing
Thin adhesive sheet with a slightly textured surface to improve first-layer adhesion. It can help reduce part movement and corner lifting when the surface, temperature and first layer are correctly adjusted.
It can be applied directly to MK3-..
3.15€
Ex Tax:2.60€
Stock: In Stock
Model: Adhesive-Foam
Self-adhesive thermal insulation for the underside of a heated bed, combining a foam layer, an aluminium-finished surface and an adhesive backing. Its nominal format suits many square 3D-printer beds, provided that their dimensions, mounting holes and cable position are checked first.
By reducing..
1.95€
Ex Tax:1.61€
Stock: In Stock
Model: Pinza-abrazadera
Stainless steel spring clip designed to secure a removable glass, mirror or other rigid build surface to a 3D printer heated bed.
Its narrow design occupies little space around the edge of the build surface and can be fitted or removed without screws. Clamping pressure is provided by the elastici..
0.75€
Ex Tax:0.62€
Stock: In Stock
Model: Cristal bor- 3mm 213x200
213 × 200 × 3 mm tempered borosilicate glass plate for use as a rigid print surface over an FDM/FFF 3D printer bed. Its lower thermal expansion compared with conventional glass helps maintain a stable surface through repeated heating and cooling cycles.
The smooth face can produce an even first l..
4.25€
Ex Tax:3.51€
Stock: In Stock
Model: Cristal bor- 3mm 214x214
214 × 214 × 3 mm tempered borosilicate glass plate for use as a rigid print surface over an FDM/FFF 3D printer bed. Its lower thermal expansion compared with conventional glass helps maintain a stable surface through repeated heating and cooling cycles.
The smooth face can produce an even first l..
6.25€
Ex Tax:5.17€
Stock: In Stock
Model: Cristal bor- 5mm 235x235
235 × 235 × 5 mm tempered borosilicate glass plate for use as a rigid print surface over an FDM/FFF 3D printer bed. Its lower thermal expansion compared with conventional glass helps maintain a stable surface through repeated heating and cooling cycles.
The smooth face can produce an even first l..
8.95€
Ex Tax:7.40€
Stock: In Stock
Model: Cristal bor- 4.5mm -329x329
329 × 329 mm, 4-4.5 mm thick tempered borosilicate glass plate for use as a rigid print surface over an FDM/FFF 3D printer bed. Its lower thermal expansion compared with conventional glass helps maintain a stable surface through repeated heating and cooling cycles.
The smooth face can produce an ..
14.50€
Ex Tax:11.98€