Menu
Your Cart

V6 Heatsink with All Metal Heatbreak for Bowden Extrusion

V6 Heatsink with All Metal Heatbreak for Bowden Extrusion
V6 Heatsink with All Metal Heatbreak for Bowden Extrusion
V6 Heatsink with All Metal Heatbreak for Bowden Extrusion
V6 Heatsink with All Metal Heatbreak for Bowden Extrusion
V6 Heatsink with All Metal Heatbreak for Bowden Extrusion
V6 Heatsink with All Metal Heatbreak for Bowden Extrusion
V6 Heatsink with All Metal Heatbreak for Bowden Extrusion
2 reviews - Write a review
2.90€
Ex Tax: 2.40€
  • Stock: 101
  • Model: V6-Heatsink-with-all-metal-throat
Add to Cart
Buy Now
Add to Wish List
Fast shipping from Spain
Delivery from 24 hours and free shipping available in mainland Spain.
Stock on hand
Shipped quickly from Spain, with a full VAT invoice.
Secure & flexible payment
Pay by card, PayPal or bank transfer.
Expert technical support
Over 10 years helping customers with components and compatibility.

This V6 heatsink features an integrated all-metal heatbreak and is designed for Bowden extrusion systems compatible with V5 and V6 hotends. Its compact design provides efficient heat dissipation while allowing the installation of a Bowden fitting for PTFE tubing.

Features

  • V6 heatsink with integrated all-metal heatbreak.
  • More compact than the V5 version.
  • 4.2 mm internal bore.
  • Designed for Bowden extrusion systems.
  • Efficient heat dissipation.

Technical Specifications

  • Type: V6 heatsink with all-metal heatbreak.
  • Configuration: Bowden extrusion.
  • Internal diameter: 4.2 mm.
  • Lower thread: M6.
  • Compatible with V5 and V6 heater blocks.
  • Upper section compatible with PC4-01 style Bowden fittings.

Compatibility

Compatible with V5 and V6 hotends using an M6 heater block and a PC4-01 style Bowden fitting for 4 mm outer diameter PTFE tubing.

Package Contents

  • 1 × V6 heatsink with all-metal heatbreak for Bowden extrusion.

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: barrels, spares, for, hotend
Quickview
BSP PC4-01 Through Bowden Connector for 4 mm PTFE Tube and 1.75 mm Filament
BSP PC4-01 Through Bowden Connector for 4 mm PTFE Tube and 1.75 mm Filament
The BSP PC4-01 through Bowden connector securely holds 4 mm outer diameter PTFE tubing in compatible hotends, extruders and other components featuring..
0.40€ Ex Tax:0.33€
Add to Cart
Add to Wish List
Quickview
V6 All Metal Hotend for 1.75 mm Filament
-44 %
V6 All Metal Hotend for 1.75 mm Filament
The V6 All Metal Hotend is designed for FDM 3D printers using 1.75 mm filament. Its all-metal construction eliminates the need for PTFE components ins..
30.00€ 16.95€ Ex Tax:14.01€
Add to Cart
Add to Wish List
Quickview
Nozzle for V5/V6 Compatible Hotends – 1.75 mm Filament (0.20 mm to 1.00 mm)
Nozzle for V5/V6 Compatible Hotends – 1.75 mm Filament (0.20 mm to 1.00 mm)
This brass nozzle is designed for hotends compatible with 1.75 mm filament. Its precision machining promotes smooth material flow and consistent extru..
0.39€ Ex Tax:0.32€
Add to Cart
Add to Wish List
Quickview
V6 Heater Block with M6 Thread Compatible with V5 and V6 Hotends
V6 Heater Block with M6 Thread Compatible with V5 and V6 Hotends
V6-format heater block designed to secure the heater cartridge and thermistor using independent clamping systems. This configuration provides stable i..
0.60€ Ex Tax:0.50€
Add to Cart
Add to Wish List
Quickview
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 Stainless Steel All Metal Heatbreak with M6/M7 Thread for 1.75 mm Filament
This stainless steel all-metal heatbreak is designed for hotends compatible with the V6 standard. Its thin transition section creates an efficient the..
1.99€ Ex Tax:1.64€
Add to Cart
Add to Wish List
Quickview
V6 PTFE-Lined Heatbreak with M6/M7 Thread for 1.75 mm Filament
V6 PTFE-Lined Heatbreak with M6/M7 Thread for 1.75 mm Filament
This stainless steel V6 heatbreak features an internal PTFE liner, allowing the PTFE tube to extend down to the top of the nozzle. It is designed for ..
1.99€ Ex Tax:1.64€
Add to Cart
Add to Wish List
Quickview
V6 Heatsink with Integrated PTFE-Lined Heatbreak and M6 Thread for Bowden Extrusion
V6 Heatsink with Integrated PTFE-Lined Heatbreak and M6 Thread for Bowden Extrusion
This V6 heatsink features an integrated PTFE-lined heatbreak, allowing the PTFE tube to extend down to the top of the nozzle. Designed for Bowden extr..
2.90€ Ex Tax:2.40€
Add to Cart
Add to Wish List
Quickview
0.4 mm tri-metal integrated nozzle for Creality K1C, Ender-3 V3 and V3 Plus
0.4 mm tri-metal integrated nozzle for Creality K1C, Ender-3 V3 and V3 Plus
Integrated 0.4 mm nozzle and heatbreak for Creality printers fitted with the Unicorn-format hotend. Its 65.4 mm geometry matches the system used on K1..
8.25€ Ex Tax:6.82€
Add to Cart
Add to Wish List
Quickview
60 W ceramic hotend kit for Creality K1 and K1 Max — 0.4 mm nozzle
60 W ceramic hotend kit for Creality K1 and K1 Max — 0.4 mm nozzle
60 W ceramic hotend kit for replacing the heating and melt-zone assembly on Creality K1 and K1 Max printers fitted with the matching earlier-generatio..
11.60€ Ex Tax:9.59€
Add to Cart
Add to Wish List
Quickview
All-metal M6 Ø7 mm heatbreak for dual V6 hotend
All-metal M6 Ø7 mm heatbreak for dual V6 hotend
This stainless-steel all-metal heatbreak is designed for dual hotends using a 7 mm smooth mounting section and an M6 threaded connection to the heater..
3.99€ Ex Tax:3.30€
Add to Cart
Add to Wish List
Quickview
Hotend heater block kit for Anycubic Kobra 3 - 0.4 mm nozzle
Out of Stock
Hotend heater block kit for Anycubic Kobra 3 - 0.4 mm nozzle
Replacement assembly for the hotend fitted to the Anycubic Kobra 3 and Kobra 3 Combo. It is supplied assembled with a heater block, heater cartridge, ..
12.70€ Ex Tax:10.50€
Add to Cart
Add to Wish List
Quickview
M6 Ø7 mm PTFE-lined heatbreak for dual hotend
M6 Ø7 mm PTFE-lined heatbreak for dual hotend
This stainless-steel heatbreak is designed for dual hotends using a 7 mm smooth mounting section and an M6 threaded connection to the heater block. It..
3.99€ Ex Tax:3.30€
Add to Cart
Add to Wish List
Quickview
M6/Ø7mm All-Metal Bimetal Heatbreak for 1.75mm Dual V6 Hotends
M6/Ø7mm All-Metal Bimetal Heatbreak for 1.75mm Dual V6 Hotends
Bimetal all-metal heatbreak for dual V6-style hotends, with an M6 × 1 thread for the heater block and a smooth Ø6.95mm upper body for retention in a h..
3.20€ Ex Tax:2.64€
Add to Cart
Add to Wish List
Quickview
Trianglelab Kraken All-Metal Titanium M6/Ø7mm Heatbreak for Dual Hotends
Trianglelab Kraken All-Metal Titanium M6/Ø7mm Heatbreak for Dual Hotends
Trianglelab Kraken all-metal heatbreak manufactured from titanium alloy for 1.75mm filament. It uses a smooth 7mm cold-side body and a hot-side M6 thr..
5.99€ Ex Tax:4.95€
Add to Cart
Add to Wish List

Related Posts

Cool Pull or Atomic Method: How to clean the nozzle of our 3D Printer
Fátima 19 Jun 4 26467
Cool Pull or Atomic Method: How to clean the nozzle of our 3D Printer
Cool Pull or Atomic Method to clean the nozzle of our 3D Printer   Cool Pull or Atomic Method is a technique to clean the nozzle. It can be done after a jam, or as a preventive cleaning after a change of material or many hours of printing.    With the Atomic Method technique, we can extract residues and/or burnt particles of filament from the n..
Read More
How to Change the Nozzle
Fátima 14 Sep 0 15858
How to Change the Nozzle
Our 3D printer, as every machine, needs a maintenance. One of the most basic ones is the change of the nozzle of our hotend. We may need to change it for several reasons, as for example, needing a smaller or bigger diameter (as bigger diameters are better for resistent parts with few details and fast printings and small diameters are better for sma..
Read More