Stock: In Stock
Model: POWGE-GT2-20Z-6mm
POWGE GT2 20-tooth drive pulley for 6 mm belts, made of 6061 aluminium and designed to be secured to a 5 mm shaft with two M4 grub screws.
Its 20T format provides a theoretical travel of 40 mm for each complete motor revolution when used with a 2 mm-pitch GT2 belt.
Features and dimensions
..
1.95€
Ex Tax:1.61€
Out of Stock
Stock: Out of Stock
Model: POWGE-GT2-20T-10mm-di5
POWGE GT2 20-tooth idler pulley with an integrated bearing and side flanges. It is designed to guide or tension 10 mm GT2 belts when the toothed side of the belt runs against the pulley.
It is suitable for motion systems requiring a wider belt than the common 6 mm format, including certain CNC ma..
3.55€
Ex Tax:2.93€
Stock: In Stock
Model: POWGE-GT2-20T-6mm-di3
POWGE GT2 20-tooth idler pulley with an integrated bearing, intended for 6 mm belts and brackets using a nominal 3 mm axle or screw.
It is designed to guide or tension the toothed side of the belt in 3D printers, CNC machines and other GT2 mechanisms specifying a 20T idler with an M3 mounting.
..
3.55€
Ex Tax:2.93€
Out of Stock
Stock: Out of Stock
Model: POWGE-GT2-20T-6mm-di5
POWGE GT2 20-tooth idler pulley with an integrated bearing, designed for 6 mm belts and mounting on a nominal 5 mm axle or screw.
Its 20-tooth profile, side flanges and integrated bearing make it suitable for tensioners and guides contacting the toothed side of the belt in 3D printers, CNC machin..
3.55€
Ex Tax:2.93€
Out of Stock
Stock: Out of Stock
Model: POWGE-GT2-80Z-6mm
POWGE GT2 80-tooth pulley for 6 mm belts, made of aluminium alloy and catalogued with a 5 mm bore.
Its large diameter makes it primarily suitable as a driven pulley in belt reductions, rotary axes, CNC mechanisms and systems requiring increased output resolution or torque.
Verified features
..
9.79€
Ex Tax:8.09€
Stock: In Stock
Model: POWGE-GT2-20T-NoTeeth-10mm-di5
POWGE smooth idler pulley with an integrated bearing and a nominal 20T-equivalent size, designed to guide or tension the back of a GT2 belt up to 10 mm wide on a nominal 5 mm axle or screw.
Its smooth cylindrical running surface supports the back of the belt without engaging its teeth. The side f..
3.55€
Ex Tax:2.93€
Out of Stock
Stock: Out of Stock
Model: GT2-POWGE-RF-belt-10mm
POWGE RF 10 mm GT2 timing belt, manufactured from nylon-covered neoprene and internally reinforced with fiberglass.
This width is intended for transmissions designed with pulleys, idlers and fastening points for 10 mm GT2 belts. The RF range is intended to reduce vibration, friction and dust gene..
6.99€
Ex Tax:5.78€
Out of Stock
Stock: Out of Stock
Model: GT2-POWGE-RF-belt-6mm
POWGE RF 6 mm GT2 timing belt, manufactured from nylon-covered neoprene and internally reinforced with fiberglass cords.
The RF range is intended for synchronous transmissions where reduced vibration, friction and dust generation are preferred compared with a conventional POWGE belt. Actual perfo..
4.99€
Ex Tax:4.12€
Out of Stock
Stock: Out of Stock
Model: GT2-POWGE-RF-belt-9mm
POWGE RF 9 mm GT2 timing belt, manufactured from nylon-covered neoprene and reinforced with internal fiberglass cords.
Its increased width provides a larger tooth contact area than a 6 mm belt, provided that the pulleys, idlers and fastening points are designed for a 9 mm belt. The RF range is in..
6.85€
Ex Tax:5.66€
Stock: In Stock
Model: CorreaGT2- reforzada-10mm
10 mm GT2 timing belt with a wear-resistant coating, manufactured from neoprene and internally reinforced with fiberglass.
It is intended for transmissions specifically designed for 10 mm belts. The coating on its toothed surface helps limit surface wear caused by repeated contact with the pulley..
2.85€
Ex Tax:2.36€
Stock: In Stock
Model: Correa GT2 - reforzada
6 mm GT2 timing belt with a wear-resistant coating, manufactured from neoprene and internally reinforced with fiberglass.
The coating applied to the toothed surface is intended to reduce surface wear caused by repeated contact with the pulleys. It can be a useful upgrade for basic 3D printers or ..
1.99€
Ex Tax:1.64€
Stock: In Stock
Model: CorreaGT2- reforzada-9mm
9 mm GT2 timing belt with a wear-resistant coating, manufactured from neoprene and internally reinforced with fiberglass cords.
The 9 mm width provides a larger tooth contact area than a 6 mm belt, while the tooth coating is intended to reduce surface wear. It should be used only with pulleys, id..
2.85€
Ex Tax:2.36€