Out of Stock
Stock: Out of Stock
Model: CableMotor-XH2.54-2m
Description
Two-metre four-conductor cable for connecting a stepper motor to a controller board or driver. It has a 2.0 mm pitch PH-type connector on the motor end and a four-position XH-type connector on the electronics end.
Its length makes it suitable for large-format 3D printers, CNC machines,..
0.99€
Ex Tax:0.82€
New
Stock: In Stock
Model: CC-Silicona400x400-220V
400 × 400 mm, 220 V, 800 W adhesive flexible silicone heater for a large aluminium bed plate. It includes approximately 1 m wiring and a 100K NTC with XH2.54 connector.Mains voltage: installation requires a qualified person, AC switching, mains protection, plate earthing and a thermal cut-out indepe..
42.75€
Ex Tax:35.33€
Only a few units in stock
-12 %
Stock: In Stock
Model: MK3-400-24V+
400 × 400 mm aluminium-core MK3 heated bed for large-format 3D printers. It is 3 mm thick, operates at 24 V and is rated at approximately 260 W. A roughly 90 cm cable and 100 kΩ temperature sensor are fitted.Nominal current is approximately 10.8 A and equivalent resistance about 2.22 Ω. Mounting cen..
62.00€ 54.50€
Ex Tax:45.04€
-47 %
Out of Stock
Stock: Out of Stock
Model: 4010-12v 1m
This 40 × 40 × 10 mm axial cooling fan operates at 12 V DC and features a 1 metre cable, making it ideal for installations where additional cable length is required between the fan and the controller or power source.
Features
40 × 40 × 10 mm axial cooling fan.
12 V DC operation.
..
4.25€ 2.25€
Ex Tax:1.86€
-47 %
Stock: In Stock
Model: 4010-24v 1m
4010 24V axial fan with a 1 metre power cable and a 2-pin XH2.54 connector. Its nominal 40 × 40 × 10 mm dimensions make it suitable for cooling hotends, heatsinks, electronics and small compartments.
The long cable simplifies installation in 3D printers and other machines where the controller boa..
4.25€ 2.25€
Ex Tax:1.86€
-69 %
Stock: In Stock
Model: 4020-24v
4020 24V axial fan with a PH connector and a 17 cm cable. Its nominal 40 × 40 × 20 mm dimensions provide a deeper housing than a 4010 fan, producing direct airflow for heatsinks, electronics and small compartments.
It is intended for applications where there is space for a 20 mm thick fan and con..
4.75€ 1.49€
Ex Tax:1.23€
-25 %
Stock: In Stock
Model: 4020-BallBearing-Fan-24V-1m
4020 24V axial fan with a ball bearing system and a 1 metre power cable. Its 40 × 40 × 20 mm format is suitable for cooling heatsinks, electronics and compact equipment that can accommodate a 20 mm thick housing.
The ball bearing system is intended for frequent or extended operation, particularly..
4.80€ 3.60€
Ex Tax:2.98€
New
Stock: In Stock
Model: Base-rugosa-41x41
410 × 410 mm Double-Sided Textured PEI Flexible Sheet with Adhesive Magnet
Flexible spring-steel sheet for a magnetic bed, coated with textured PEI on both sides. The set includes the adhesive magnet for installation on a compatible platform, providing a 410 × 410 mm printing surface.
Nominal size..
41.50€
Ex Tax:34.30€
Stock: In Stock
Model: 4x-clip
This set of four reversible metal clamps is designed to securely hold print surfaces such as glass or build plates onto a heated bed. Their compact design minimizes interference with the print area while allowing quick installation and removal whenever needed.
Features
Set of 4 reversibl..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: 5x5-Zcoupler
Designed to connect a stepper motor shaft to a lead screw, this 5 mm to 5 mm flexible shaft coupling helps compensate for minor shaft misalignment while maintaining smooth and consistent power transmission.
Manufactured from aluminium, it combines low weight with good mechanical strength, making ..
1.25€
Ex Tax:1.03€
Stock: In Stock
Model: Rigid-5x5
This 5 mm to 5 mm rigid shaft coupling is designed to directly connect two shafts of the same diameter, providing backlash-free torque transmission between a motor and the driven component. It is intended for applications where both shafts are accurately aligned and a solid, non-flexible connection ..
0.89€
Ex Tax:0.74€
Stock: In Stock
Model: 5x8 Zcoupler
Designed to connect a stepper motor shaft to a lead screw, this 5 mm to 8 mm flexible shaft coupling helps compensate for minor shaft misalignment while maintaining smooth and consistent motion.
Manufactured from aluminium, it provides a lightweight yet durable connection between shafts of differ..
1.15€
Ex Tax:0.95€