- Stock: 3
- Model: Base-rugosa-41x41
Type:
220x220mm Double textured
220x220mm Textured/smooth
235x235mm Double textured
235x235mm Textured/smooth
330x330mm Double textured
330x330mm Textured/smooth
410x410mm Double textured
500x500mm Double textured
410 × 410 mm Double-Sided Textured PEI Flexible Sheet with Adhesive Magnet
Flexible spring-steel sheet for a magnetic bed, coated with textured PEI on both sides. The set includes the adhesive magnet for installation on a compatible platform, providing a 410 × 410 mm printing surface.
- Nominal size: 410 × 410 mm.
- Sheet material: flexible spring steel.
- Surface: textured PEI on both sides.
- Specified steel thickness: approximately 0.4 mm.
- Included: adhesive magnet for the base.
Before installation, check that the platform accepts a 410 × 410 mm surface and that the frame, sensors and toolhead have enough clearance. The base must be clean, flat and securely fixed.
Set the first layer carefully to avoid excessive adhesion. To remove parts, wait until the sheet reaches room temperature, preferably below 30 °C, and flex it gently. Do not force parts off while the surface is hot.
Results also depend on filament, temperature, levelling and cleaning. Both sides can be used; test the finish and adhesion before large parts or demanding materials.
For a larger surface, see the 500 × 500 mm version.
